Explosionproof Electric Hoist HB (BCD) :0.5T to 20T

Explosionproof Electric Hoist HB(BCD) :0.5T to 20T
1.Travel speed :20/30m/min
2.Wire Rope Diameter:According to the custome
  Proof wire rope hoist according to GB3836.1-2000 "explosive gas atmospheres proof electrical equipment, Part I: General requirements" and GB3836.2-2000 "explosive gas atmospheres Part II Proof Electrical Equipment: Flameproof" d "" requirement, the electrical, electronics for the flameproof, explosion-proof level for the Exd Ⅱ CT4, run the institutions dealing with fire flowers. Machine line JB/T10222-2001 "explosion-proof electric wire rope hoist" requirement, explosion-proof grade were Exd Ⅱ BT4, Exd Ⅱ CT4. The machine can be fixed with the shop alone with hanging rail can also be hung with LXB explosion-proof electric single-girder, LB explosion-proof electric single girder, double girder supporting the use of explosion-proof hoist. Its starting weight 1t-32t. Operating temperature is -25 ℃ ~ 40 ℃.

    HB-type explosion-proof electric hoist rope with explosion-proof applicable to the factory level no higher than Class B or C grade not lower than the ignition temperature class T4 (135 ℃) group of combustible gas, steam and air, an explosive gas environment, the application of the danger zone to a zone or two areas, does not apply to Zone 0.

Note: 0 District: Under normal circumstances, an explosive gas mixture continuously and frequently occurred a short time or for long periods.
    Zone 1: Under normal circumstances, explosive gas mixtures are likely places.
    Zone 2: Under normal circumstances, an explosive gas mixture can occur only in unusual circumstances, equipment failure or both may occur misuse cases, occasionally place a short time there.
    Explosion-proof electric wire rope hoist the table below for examples of dangerous gases, are not included in the table of other dangerous gases GB3836.1 see Appendix.

Description:

Explosionproof Electric Hoist  HB(BCD) :0.5T to 20T

1.Type :HB(BCD)

2. Pendant control,remote control as your required

3.This hoist is widely used in single beam crane for handing  materials. We can provide low headroom hoist as your required to save your workshop built cost.