DSH-261 Pensky-Martens Closed Cup Flash Point Tester

A:Briefdescription:

     DSH-261 Pensky-Martens Closed Cup Flash Point Tester is manufactured as per standards GB/T 261-2008 Determinationof Flash Point(Pensky-martens Closed Cup) and ASTM D93.

    DSH-261 Pensky-Martens Closed Cup Flash Point Tester is suitableto make determination of the closed cup flash point of the petroleum productswhich flash point over 40℃.

B:Main advantages:

  1. This instrument is designed correspond withthe requirements of GB/T261-2008.

  2. The heating power is continuously andstepless adjustable. The power is shown visually by voltmeter. The temperaturecontrol mode is advanced and reasonable.

  3. The structure is designed small andexquisite. The stainless-steel table board is beautiful and easy to clean.

  4. Operation is easy. Test results areprecise. It has been chosen as the instrument to test the closed cup flashpoint by many metering and detecting units.

C: Main technical specifications and parameters

   1.Power supply：AC (220±10%)V, 50Hz.

   2.Heating device:：The heating power iscontinuously adjustable from 0 W to 600W.

   3.Rate of sample’s heating up:：(1～12)℃/min；Controllable andadjustable.

   4.Electric stirring rate：(1)(90～120)turns/min,suitableto test procedure A.

                      (2)(250±10)turns/min,suitable to test procedure B.

   5.Standard oil cup：(1)Inner diameter:50.7mm～50.8mm.

                    (2)Depth: 55.7mm～56.0mm.

                    (3)The scribed line depthof capacity of testing oil: 33.9mm～34.3mm.

                    (4)Capacity of testingoil:about 70ml

   6.Igniting device：(1)Igniting source: gas（or other civilian fuels，the same below）

                  (2)Bore diameter: 0.8mm