Vitrified bond CBN Wheels

Vitrified bond CBN Grinding Wheel

Vitrified products have the features of sharp cutting , high efficiency ,long life ,less heat and jam generated in grinding ,wheels according to the standard GB /T6409.2-1996.The diameter range is 8-750 mm: the thickness range is 1-300  mm  ,the grit size range is 60/70~ W3.5,We can also design and make nonstandard grinding wheels according to customers ′requirement .

 1.* APPLICATION

 Vitrified CBN products:   Mainly used for machining cast iron (allow cast iron ,chilled cast iron ,nodular cast iron ,etc),steel(45#,55#,20Cr,etc).

 Ceramic bond /vitrified grinding wheel, use cubic boron carbide as raw material, use metal powder, ceramic powder, resin as bonded type, sintering as different kind types, different shape grinding wheel used for different workpiece to grinding and polishing.

 This wheels keeps the hardness of the vitrified grinding wheels, and low sintering temperature, high strength, toughness control abrasive performance is good, and heat resistance, oil resistance has, water resistant, acid and alkali resistant, from sharp the gender is good, can trim, trim interval long, even for cooling, porosity, scraps discharge, etc.

2.Specification:

We provide wheels as per your entire requirement. Here our drawings are as below,

We can also produce grinding wheels according to your drawings.

3.Performance on grit sizes:

 The recommended grit size for different grinding processes as follows:

 4.Grit size is available upon request .

 5.Market: India (Surat and Mumbai), Thailand (Bangkok), Belgium, USA, SA, Botswana, Namibia and other countries and areas .

 6.Main areas:North America,Eastern Europe,Southeast Asia,Africa,Mid East,Western Europe .

 7.Payment term: credit cards, T/T, paypal, western union, etc.

 8.Delivery: 5 days-12 days

 9.After-service:

We guarantee the best quality,offering technical guide and replacement for inferior quality wheel

10.Order Guideline:

 Detailed information as follows is required:

1. Drawings or Detailed dimension of grinding wheels and workpiece.

 2.Grinder model or grinding mode of the grinder.

 3.Grinding allowance,feed -rate,rotating speed of each spindle.

 4.Precision requirements of workpiece.

Henan Shengchuang Super Hard Products Co., Ltd is one professional technological enterprise engaged in developing, producing, selling and servicing ultra hard products especially kinds of vitrified diamond grinding wheel, vitrified CBN grinding wheel, and  Big Size Synthetic Monocrystalline Diamond, PCD Polycrystalline Diamond, TSP Polycrystalline Diamond, CBN inserts for Hardened steel, PCBN Cutting Tool Blanks, PCD Cutting Tool Blanks, Diamond Bruting wheel, Vitrified Grinding Wheels for PCD & PCBN tools, PDC Cutter, PCD Tool Grinder, PCD Inserts, PCBN Inserts, CVD Diamond Tools, etc.