Steel Cord Conveyor Belt

It can be extensively used in the coal, mining, port, metallurgical, electrical and chemical industries, and is applicable for the conveyance of materials with heavy load, long distance and large freight volume.

General Conveyer Belt

It uses the new type structural steel cable as the tension element, features largely in the high tension strength, small elongation, excellent troughability and high flexibility, and is applicable for the conveyance of materials with long distance, large freight volume and high speed.

The core rubber has enough diffusion space for each wire in strand, the bonding strength of the rubber and steel cable is very high, it is rust and corrosion resistance, it relieves the mutual shearing and torsion of the wires in strands, it has high dynamic fatigue resistance, and the product has a long service life.
Tear Resistant(Transverse Reinforced)St Belt
Structure
It uses the new type steel cable as the tension element. On one side or two sides vertical that is perpendicular to the lengthways steel cable, evenly lay the reinforcing layer of the steel cable, steel cord, fabric, etc. broadways.
Character:It has excellent impact and tearing resistance performance.
  Tear Resist Belt With Detechor
Structure
It uses the new type steel cable as the tension element. In-between the steel cord conveyer belt’s core rubber and bottom belt cover, build in the phase shift sensor (coil) at a certain distance lengthways.

Character
1.Control: it gives out an alarm and stops running automatically whenever a tearing rupture of the belt is detected.
2.Alarm and stops running automatically whenever the belt runs abnormally and reaches the preset off speed.
3.It has memory function and displays the belt running data and status.


 

Main technical parameters of the steel cord flame-retardant conveyor belt produced for coal mines in accordance with MT668-2008

Technology Data	Belt Intension
	ST/S 630	ST/S 800	ST/S 1000	ST/S 1250	ST/S 1600	ST/S 2000	ST/S 2500	ST/S 2800	ST/S 3150	ST/S 3500	ST/S 4000	ST/S 4500	ST/S 5000	ST/S 5400
Longitudinal Tensile Strength N/mm	630	800	1000	1250	1600	2000	2500	2800	3150	3500	4000	4500	5000	5400
Maximum Nominal Diameter Of Steel Wire Rope (mm)	3.0	3.5	4.0	4.5	5.0	6.0	7.2	7.5	8.1	8.6	8.9	9.7	10.9	11.3
Steel Cord pitch(mm)	10 ±1.5	10 ±1.5	12 ±1.5	12 ±1.5	12 ±1.5	12 ±1.5	15 ±1.5	15 ±1.5	15 ±1.5	15 ±1.5	15 ±1.5	16 ±1.5	16 ±1.5	17 ±1.5
Width Of Top Cover (mm)	5	5	6	6	6	8	8	8	8	8	8	8	8.5	9
Width of Bottom Cover (mm)	5	5	6	6	6	8	8	8	8	8	8	8	8.5	9
Width (mm)	The amount of steel cord rope
800	75	75	63	63	63	63	50	50	50	50
1000	95	95	79	79	79	79	64	64	64	64	64	59	55	55
1200	113	113	94	94	94	94	76	76	76	77	77	71	66	66
1400	133	133	111	111	111	111	89	89	89	90	90	84	78	78
1600	151	151	126	126	126	126	101	101	101	104	104	96	90	90
1800	171	171	143	143	143	143	114	114	114	117	117	109	102	102
2000	196	196	159	159	159	159	128	128	128	130	130	121	113	113
2200	216	216	176	176	176	176	141	141	141	144	144	134	125	125

The Recommended Minimum Conveyor Rollers'diameter ST Series

Belt Model ST	ST 630	ST 800	ST 1000	ST 1250	ST 1600	ST 2000	ST 2500	ST 2800	ST 3150	ST 3500	ST 4000	ST 4500	ST 5000	ST 5400
Diameter of Minimum roller(mm)	500	500	630	800	1000	1000	1250	1250	1400	1600	1600	1600	1800	1800

Steel Cord Belt Type and Standard Type According to the cover property, it can be divided into the following types: general type, fire-retardant type for coal mines, general-purpose fire-retardant type, cold resistant type, wearable type, heat resistant type, acid-alkali resistant type, oil resistant type, etc. Applicable Standards

Type	Standard
Normal grade	Lu Q/QD439-80  GB/T9770-2001
Flame resistant	MT668-2008
General purpose, flame retardant	HG/T3973-2008
Heat resistant	GB/T20021-2005
Abrasion resistant	Shore Abrasion ≤90mm3
Abrasion & heat resistant	Below 125,abracion ≤150mm3
Tear resistant	HG/T3646-1999
Cole resistant	HG/T3647-1999