PC Tire Slip Camber Angle Test Machine

Test Position: 2         
Drum Diameter × Width: Φ1707.6 × 500mm
Drum Radial Run-out: ≤0.20mm
Drum lateral Run-out: ≤ 0.20mm
It is used for testing tire endurance performance with slip and camber function.
Residual imbalance: < 5g
Tire Diameter: Φ 450mm ~ Φ1100mm
Tire Max. Section Width: < 450mm
Test Speed: Max.400km/h,accuracy: 0~+2 km/h
Test Load: Max.35 kN,accuracy: ±1%P.S.
Loading Means: Hydraulic servo in closed-loop
Slip range: ± 5°, dynamic  0 ~ 2°/sec, accuracy: ± 0.1°
Camber range: ± 5°, pre-set, accuracy: ± 0.1°
Angle change: Hydraulic servo in closed-loop control
Motor Power: 198 kW DC
Dimension:
Approx. L9000mm×W2600mm×H3400mm
Total Weight: Approx. 20 t