Contact Platform Support
Help CenterEST-GSM DCS Dual Band Mobile Phone Signal Repeater/Amplifier/Booster
Related Products
-
EST-GSM/DCS/3G Tri-band Mobile Phone Signal RepeaterNegotiableMOQ: 1 Piece -
EST-3G950 Mobile Phone Signal Repeater/Amplifier/BoosterNegotiableMOQ: 1 Piece
-
EST-3G 980 Mobile Phone Signal Repeater/Amplifier/BoosterNegotiableMOQ: 1 Set
-
EST-GSM/DCS/3G Tri-band Mobile Phone Signal Repeater/AmplifierNegotiableMOQ: 1 Meter
-
EST-GSM/UMTS Dual Band Mobile Phone Signal Repeater/Amplifier/BoosterNegotiableMOQ: 1 Carton
Certification:CE&ROHS
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
|
Introduction To Mobile Phone Signal Repeater |
|
1. Enhance Mobile Phone |
|
2. Improve |
|
3. Reduce |
|
4. Protract |
|
5. Economic Building Cost |
|
6. Easy Operation |
|
7. Easy Installation |
|
8. Build-in Power Supply |
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
|
2. Features |
|
High gain, easy installation and operation. |
|
Full-duplex, single-port design, build-in power supply. |
|
Use ALC technology, adjust extent automatically |
|
LED Light Working & Signal Condition Indicators |
|
Big linear power, control intermodulation & scatteration stably |
|
Dependability stand by GB6993-86 standard |
|
Compatibility of electromagnetism according with ETS300 609-4 |
|
CE and RoHs Approved |
Technique
|
Frequency range |
Uplink 1710-1785MHz 1930-1990MHz Downlink1805-1880MHz 2110-1180MHz |
|
Gain ( dB) |
Uplink Gp≥60 Downlink Gp≥65 |
|
Export power (Po) |
≥27dBm |
|
Pass band ripple |
≤3dB |
|
I/O impedance |
50Ω/N connector |
|
Noise figure |
≤4dB |
|
Transmission Delay |
≤0.5μs |
|
Ambient temperature |
-10℃～60℃ |
|
Power supply |
AC110～240V 45～55Hz |
|
Size |
220 x180 x 20 mm |
|
Reliability |
To the GB6993-86 standard |
|
Electromagnetic compatibility |
To the ETS300 694-4 standard |
|
Function |
a) Power supply LED denote b) Export power LED denote |
|
coverage area |
2000 m2 |
SpecificationsInstallation Sketch Map
Installation Approaches
Fix up outdoor antenna reception on housetop and point to signal tower. Connect outdoor antenna to “outdoor” port in repeater machine through cable. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also. Plug power adaptor into AC power socket and finish installation.Technique Supporting
If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM. If can not call out, please adjust the direction of outdoor antenna. If strength is not steady, p
Send Inquiry to This Supplier
You May Also Like
-
Storage BatteryNegotiableMOQ: 2000 Sets
-
Untested Scrap Recycle Computer Hardware Used Laptop BatteryNegotiableMOQ: 10000 Pieces
-
32900 Rechargeable LiFePO4 3.2V 5500mAh Battery Cell for EnergyUS$ 4.5 - 5MOQ: 2000 Pieces
-
BATTERY FOR NDS NDS LITENegotiableMOQ: 10 Pieces
-
Sealed Lead Acid Dry Charged Battery 12v 4ah Battery for MotorcycleUS$ 5.33 - 5.9MOQ: 300 Pieces
-
Solar Generator With the Lithium-ion Battery S-1207US$ 20 - 500MOQ: 100 Pieces
-
12V Battery UPS Li-ion Battery Solar BatteryUS$ 60 - 78MOQ: 1 Piece
-
AGM Battery Separator Glass Fiber MatUS$ 1 - 10MOQ: 100 Kilograms
-
25C 3S Lithium Ion Battery 12V 11.1V 900mAh 3cell for Align KX019011 T-Rex 250 PROUS$ 1 - 100MOQ: 100 Pieces
-
12 Solar Light Lights AA 800mAh Rechargeable Battery Batteries Long Lasting 3 PaNegotiableMOQ: 3000 Pieces
