Cnc Veneer Rotary Lathe

Main functions and features:

CNC non spindle veneer rotary lathe is a device, which can rotary cut the man-straightened logs or wood core cut by spindle veneer rotary lathe into veneer. It has two fixed rollers. By moving horizontally with the push of two screw rods, the knife-lock can adjust the moving direction of guide following a shape of rectangle. The use of advanced numerical system can figure out the feeding speed and make sure same thickness based on log diameters, friction roller rolling speed and veneer thickness required and other parameters. Besides, the knife lock can adjust the structure of the gap between single row and rotary knife automatically. (Seam self-adjustment)

   Comparing with similar devices, this equipment with the above structure has the features as followed:

   Large thickness adjustment ranges and simple, easy and practical adjusting.

   Even veneer thickness.

   Digital displaying the operation processes, providing simple adjusting data.

   Perfect protection and open phase protection and over-burden alert function.

   Seam self-adjustment function, enhanced veneer smoothness.

   Pushed with screw rods, little breaks and none unusual fan-shaped veneer. 

   Closed structure, reliable functions, easy operation and high efficient production.

Product technical specification:

Log dimension processing (DxL): 350x2600 mm

Veneer thickness range: 0.3-1.4 mm

Rotary knife specification (LxWxT):2700x140x12.7 mm

Rotary cutting log specification (DxL):340x2600 mm

The smallest diameter core: 28 mm

Arc length of rotary knife(mm):polysius29-31; peal polishing34-36

Wire speed of friction roller(m/s):26-30

Reference output: 30 m³/day

Power: double-roller engine 1pc x 4kw-4, 380V-50Hz 3phase

      Single-roller engine 1pc x 4kw-4, 380V-50Hz 3phase

      Feeding engine 1pc x 5.5kw-4, 380V-50Hz 3phase

Applied voltage ranges:3phase 380V±20%(other voltage and rates can be customerized)

Product dimension: 4100x2000x1200 mm

Weight: 4.5 t

Remark: When the product is improved, the appearance and the indexes should be standardized according to the physical goods.