Contact Platform Support
Help CenterDIN 6923 Stainless Steel Flange Nut With Low Price And High Quality Stainless Steel Nuts
Related Products
-
Stainless Steel Nuts M12 DIN6923 Serrated Hex Flange Nuts in StockUS$ 0.1 - 0.2MOQ: 1 Kilogram -
DIN 1587 Stainless Steel Prevailing Torque Type Hexagon Domed Cap Nuts With Non-metallic Insert StaiUS$ 0.1 - 0.15MOQ: 1 Piece
-
Stainless Steel Nuts A2-70 DIN928 M8 Square Weld Nuts With Uniform ProjectionsUS$ 0.1 / - 0.1 /MOQ: 1 Kilogram
-
DIN 6334 Stainless Steel Hexagon Coupling Nuts Stainless Steel NutsUS$ 0.1 - 0.21MOQ: 1 Set
-
ASTM F594 1/4-1-1/2 Hex Nuts SS304 SS316 Stainless Steel NutsUS$ 0.01 - 1/MOQ: 1 Ton
Certification:ISO9001
DIN 6923 Stainless Steel Flange Nut With Low Price And High Quality Stainless Steel Nuts
1.Product Description
Flange nuts, also known as the nut with pad, flower tooth nut, six flange nut, flange nut etc.. Mostly used in pipe connection or need to increase the nut contact surface of the workpiece.
Self locking nuts, pine nut, locking nut, four claw nut, screw in nut lock nut, a thin rod screw self-locking nuts hexagon cap nut special foundation bolt with nut, hex crown shaped thin eyebolt nut connection.
Fine teeth, all metal, six angle, all metal, six angle, all metal, angle, flange, fine, non metallic, non metallic, six angle, and six angle, flange, and nut
Square weld nuts six welding nut fastening nut embedded circular nuts
Round nut with hole end round nut with grooves with side hole round nut round nuts
Round nut ring nut
2.Specification
| Item | Flange nuts | ||||||
| Standard: | DIN 6923 | ||||||
| Material | Stainless Steel: SS201 SS304/SS304L SS316/SS316L |
||||||
| Production Process |
M2-M30:Cold Froging,M24-M100 Hot Forging, Machining and CNC for Customized fastener |
||||||
| Stock Products |
Stainless steel: All DIN Standard stainless steel nut |
||||||
3.Application
Flange nut and the hexagonal nut size and thread specification is basically the same, just above the hexagon nut compared, it is washers and nuts is integrated, and in the following anti-skid tooth pattern, there is an increase in the nut and the workpiece surface area contact, compared to the common nut and washer combination, more solid and tension.
Generally common flange nut specifications are generally below M20, because most of the flange nuts are used in the pipe and flange, so by the workpiece constraints, flange nut specifications compared to the nut. M20 above some of the flange nuts are mostly flat flange, that is, there is no tooth pattern on the flange, most of these nuts are used in some special equipment and special places, the general sales of the manufacturers are not on the spot.
4.Advantage
| 1) we can provide MTC and test report . |
| 2) Free samples |
5.more pictures
Send Inquiry to This Supplier
You May Also Like
-
Gravity Vacuum Investment Cast Aluminum Parts for Auto/Motorcycle/Turbojet ApplicationsNegotiableMOQ: 50 Pieces
-
Towing Automobile Baler Long Design LifeNegotiableMOQ: 1 Set
-
Sheet Metal ProcessingNegotiableMOQ: 2500 Units
-
Custom Stamping Stainless Steel, Aluminum Bracket, Custom Metal StampingNegotiableMOQ: 1
-
Sheet Metal Fabrication Metal Wire Cutting EDM Fabrication ServiceUS$ 1.5 - 1.5MOQ: 1000 Kilograms
-
Brass Sheet Metal Stamped Parts Made By Progressive DieUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Fashion Customized Metal Wire Rope Luggage Hang TagUS$ 0.1 - 0.8MOQ: 500 Pieces
-
10 Inch Sheet Metal Nibbler With Wire Cutter For Cutting ToolUS$ 8 - 20MOQ: 624 Pieces
-
China ISO CUSTOM Sheetmetal PartsUS$ 4.9 - 7.9MOQ: 1000 Pieces
-
Stainless Steel Meat HookNegotiableMOQ: 50 Pieces
