Contact Platform Support
Help CenterSell China Professional Manufacture Coil Winding Machine Wire Guide Tubes,wire Guide Needles,wire Guide Nozzles,coil Winding Nozzles,Ceramic Eyelet Guide
Related Products
-
Sell Coil Winding Wire Guide Nozzle (Tungsten Carbide Nozzle) Hard Alloy Coil Winding Nozzle Guides,US$ 4.5 - 4.5MOQ: 10 Meters -
Sell Ruby Tiped Coil Winding Nozzle(Ruby Nozzle)Coil Winding Nozzle GuidesUS$ 7 - 7MOQ: 10 Meters
-
Sell Motor Nozzle(coil Winding Nozzle )Wire Guide NozzleNegotiableMOQ: 10 Meters
-
Sell Coil Winding Mechanical Tensioner(Wire Tensioner)NegotiableMOQ: 1 Meter
-
Sell Ceramic Nozzles,coil Winding Nozzles,wire Guide TubesNegotiableMOQ: 100 Kilograms
HARTAI TECHNOLOGY INDUSTRY CO.,LTD is professional supplier for coil winding wire guide nozzles(Tungsten carbide nozzle),wire guide tubes,wire guide eyelets,wire guide needles with competitive price
Tungsten carbide wire guide nozzles(motor coil winding nozzles)used in coil winding machines to guide the wire to wind in the bobbin, pins and etc. For the stators and rotors in Series, cooling fans, micro-motor and the motor industries.
Features:
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness. Confirm your nozzles measurements according to your winding machine and coil products.
Send Inquiry to This Supplier
You May Also Like
-
Standard Size Shrink Disc Locking Assembly For Motor Conveyor Packaging Machine PartsNegotiableMOQ: 1 Piece
-
Glass WoolNegotiableMOQ: 2500 Rolls
-
Self-fusing Electrical Silicone Rubber Hose Leak Waterproof High Pressure Plumbing Repair Tape Silicone Self Fusing TapeNegotiableMOQ: 1 Roll
-
Air Conditioner Refrigeration HVAC Electrical Insulation Tape Pvc Insulating Tape PVC Insulation TapeNegotiableMOQ: 1
-
Silicon Rubber Pad Thickness 1.0,silicon Pad for SublimationUS$ 5 - 50MOQ: 10 Pieces
-
Polymeric Insulator Fittings Y Style FittingUS$ 3 - 5MOQ: 1000 Pieces
-
Polyimide TapeNegotiableMOQ: 100 Rolls
-
Fiberglass ProfileUS$ 0.2 - 19MOQ: 3000 Meters
-
Wool Noil / Wool Waste / NoilUS$ 2.7 - 2.8MOQ: 15 Tons
-
SL-4050F Screw In Bus Bar Support Plastic Overhead Line InsulatorUS$ 0.1 - 5MOQ: 100 Pieces
