Contact Platform Support
Help CenterGSK983M Milling CNC System
Related Products
GSK983M is a high cost-performance and high reliable CNC developed especially for high speed, high precision and high efficient machining. Due to the applied high speed micro processor and high speed and precision servo system as well as sufficient CNC and high speed PLC functions, the machining efficiency has truly realized a higher standard.
High precision machining
The high precision and high resonance position control has been realized by high performance position closed loop control chip and high precision position detecting components.
The mechanical errors in transmission chains such as pitch error of ball screw can be remedied by pitch memory error compensation.
Feedrate override can be automatically adjusted in the corner contour machining.
High speed machining
When the system resolution is 1μm, the highest feedrate can reach 240m /min which is suitable for the control of milling press, MCs, engraving machines and super precision machine tools. The continuous high speed machining of micro block is realized by the distributed processing of multi-high speed CPU. The super processing capability of 1000 instruction words per second is especially suitable for the machining of high speed mould, auto parts and the control of woodworkers and laser machines.
High speed DNC functions
The specially developed high speed DNC buffer interface realizes the high speed DNC machining by the connection to PC or U disk at the baud rate as high as 115200 .
Sufficient control functions
It has the functions of maximum 5 feeding axes plus 1 spindle control, cutting tools life management, scaling, coordinate system rotation, complex canned cycle, background editing, graphics display and special user macro program that can easily carry out some special machining.
Powerful built-in PLC
The built-in sequence control for machine and the large PLC capacity for peripherals have greatly simplified the strong power design.
PLC-A 2000 steps PLC-B 12000 steps
Smart CNC
It adopts the latest high integral FPGA, CPLD chips and surface sticking adornment techniques which greatly reduces the dimensions of the control unit. And the LCD displayer adopted realizes the thin model of display unit.
Module I/O
The module design adopts I/O unit which can be paralleled by requirement with maximum (input/output) points are 192/128. It can be fixed on the standard DIN rail to directly drive the load such as contactor, which makes the strong power design much simple and the space taken up is much more reduced.
The wires from CNC to strong power plate are much more saved through the connection of the high speed serial communication ports with CNC.
The machine operation panel
It has maximum 64 mechanical keys with a LED indicator for each. Their function specified by PLC programming and also they can correspondingly connect the switches of feedrate override, spindle override, MPG override and coordinate axis.
Separating structure:
Connect CNC by the high speed serial communication ports to save the wire.
|
NC function |
||
|
Controlled axis |
Controlled axis and link axis: up to 5 feed axes, 1 spindle and 5 link axes |
|
|
Interpolation method: linear(G01), arc(G02, G03),sine(G07) |
||
|
Max. stroke: metric:±99999.999mm;inch:±9999.9999inch |
||
|
|
Least input increment:0.001mm/metric 0.0001inch/inch |
|
|
Least increment:X axis:0.001mm/metric 0.0001inch/inch |
||
|
Max. traverse rate |
60,000mm/min or 2400inch/min |
|
|
Max. feedrate |
G94:30,000mm/min or 1200.00inch /min |
|
|
G95: 500.00mm/rev or 50.0000inch/rev |
||
|
Automatic acceleration/deceleration: the system automatically executes the linear acceleration/deceleration to shorten the positioning time when the rapid feed is executed in Jog or Auto mode |
||
|
Automatic acceleration/deceleration in cutting feed mode: the exponential automatic acceleration/ deceleration is executed in the cutting feed or manual continuous feed mode, and its time constant can be set by the related parameters from 8ms to 4000ms. |
||
|
Soft tapping function (standard allocation function); rigid tapping function (optional function). |
||
|
Buffer register: advance to read the commands of the following two blocks to eliminate the interruption of NC command caused by reading the commands to improve the working efficiency. |
||
|
G commands |
66 kinds of G command: G00, G01, G02, G03, G04, G07, G09, G10, G17, G18, G19, G20, G21, G22, G23, G27, G28, G29, G30, G31, G33, G40, G41, G42, G43, G44, G45, G46, G47, G48, G49, G50, G51, G54, G55, G56, G57, G58, G59, G60, G61, G62, G64, G65, G66, G67, G73, G74, G76, G80, G81, G82, G83, G84, G85, G86, G87, G88, G89, G90, G91 G92, G94, G95, G98, G99 |
|
|
MSTB function |
Tool function:T2 digit/T4 digit .99 groups tool offset .tool position offset .tool length compensation .tool nose radius compensation B/C |
|
|
communication input of tool offset value . tool length measure |
||
|
Spindle function S:S2 digit/ S4 digit A(12 digit BCD output/analog output) .S4 digit B(12 digit BCD output/analog output)(4-grade gear input). max. spindle speed limit. |
||
|
auxiliary function M:specified by the sequential 2 digits after address M. |
||
|
The second auxiliary function B: it is specified by the sequential 3 digitals behind B, and BCD signals of the three digitals are transmitted to the machine side. The function is used for the positioning of graduation worktable, |
||
|
Precision compensation |
stored pitch error compensation: compensate the error caused by machine position to improve the processing precision and the compensated data is stored to the memory. |
|
|
backlash compensation: compensating the loss momentum of machine |
||
|
Tool length compensation and tool nose radius compensation:the tool length compensation is executed by G commands(G43,G44,G49)and the tool nose radius compensation by(G40,G41,G42), the compensation value for every tool is stored to the memory. Max. compensation value: ±999.999mm or ±99.9999inch. |
||
|
Reliability |
emergency stop;overtravel;.stored stroke limit;.NC ready signal;.servo ready signal;.MST functional completion signal;.start signal in automatic run;.automatic running signal;.feed hold indicator signal;.safety door interlock signal; |
|
|
NC alarm:.program error and operation error;.overtravel error;.servo system error;.connection error, data transmission error between MDI and CRT, PLC error;.memory(ROM and RAM)error; |
||
|
Self-diagnosis: execute the following checks:system abnormity;.position control abnormity;.servo system abnormity;.CPU abnormity;.ROM abnormity;.RAM abnormity;.data transmission between MDI and the machine operation panel;.RS232 read abnormity;.PC data transmission abnormity and so on. |
||
|
Operation |
dry run .interlock. single block . optional skip block .manual absolute value ON/OFF .auxiliary function lock(M. S.T lock) |
|
|
Display |
983M-S: 7.4inch 640×480 homochrome LCD screen |
|
|
system parameter, diagnosis number, alarm number, macro variable value, tool offset setting, MDI command, MST state . actual axis speed, . machining path graph . Run time and other NC commands and state information |
||
|
PLC function |
Control method:cycle run; run speed:15us/step for basic command |
|
|
Input/output:192/128,PLC capacity 2000steps |
||
|
Development method: PLC command or ladder diagram |
||
|
Command amount: 34 including 12 basic commands and 22 function commands |
||
|
DNC function |
Serial DNC can be connected with U disk (option) |
|
Send Inquiry to This Supplier
You May Also Like
-
Original SEM 5371494 Sealing Ring Kit 0.4kg for SEM Machine With Good PriceUS$ 12.12 - 12.75MOQ: 10 Units -
In Stock MTU Spare Parts 3520170053 PROTECT.SLEEVENegotiableMOQ: 1 Ampere
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Filter Element 4110016259009 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
PC200-6 Excavator H-Link Bucket Linkage Arm 3.0-85 YNF18363NegotiableMOQ: 1 Piece
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Durable Model 1460A053 Fuel Injection Pump Mitsubishi High-pressure Fuel Pump 294000-1370US$ 370 - 410MOQ: 1 Unit
-
MS01 1200mm Wide Excavator Attachment Mud MucketUS$ 240 - 280MOQ: 1 Piece
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
