Contact Platform Support
Help CenterRear Side Draft Spray Booth Paint Prep Station 6.3 M Multi Union Combined
Related Products
-
High Efficiency Auto Body Paint Booth Prep Station PVC Curtain SeparatedNegotiableMOQ: 1 Piece -
Heat Recuperator System Paint Prep Station Diesel Burner Heating Eco FriendlyNegotiableMOQ: 1 Piece
-
Side Draft Paint Prep Station Spray Booth Schneider Components Control PanelNegotiableMOQ: 1 Unit
-
Vehicle Polishing Paint Prep Station Spray Booth Energy Saving CE TUV CertificationNegotiableMOQ: 1 Piece
-
Customized Spray Bake Booth Paint Preparation Station , Clean Shop Prep StationNegotiableMOQ: 1 Piece
Certification:CE, TUV
Rear Side Draft Spray Booth Paint Prep Station 6.3 M Multi Union Combined
Features
Prepation bay special for the job before painting, under coat, base coat, top coat, and sanding, polishing will be made in the station, intake provide the fresh air, and exhaust extract the duct out.
1. Each unit with one 5.5kw fan for intake and exhaust.
2. Quality brand turbo fans, directly drive type.
3. Heating system option.
4. Rear side draft air flow.
5, Continue line with rail on floor option.
6, Led light and Scheider electric components.
7, Moveable infrared on the ceiling option.
8, Different job in different position at the same time.
9, PVC curtain between the stations.
Advantage
Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, down air flow comes out, and extraction from rear side directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.
Below for one unit only:
| Item | Detailed Specification |
| Inside dimension | 6300×3450×2650 mm (L×W×H) |
| Outside dimension | 7550×3550×3100mm (L×W×H) |
| Plenum dimension | 6300×3450×450 mm (L×W×H) |
| Room body | Back side EPS wall panel, the other sides PVC curtain. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated. |
| Generator cabinet | Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | 1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter. |
| Roof | Galvanized steel |
| Control system | Fan switch, lighting switch, emergency stop. |
| Installs way | Hooked from roof by steel cable or supported by steel column. |
| Total power | 6.7KW (Power supply 1×220V, 3×380V, 50HZ) |
Send Inquiry to This Supplier
You May Also Like
-
HNPR03118 Truck Parts Wiper LinkageNegotiableMOQ: 1
-
Kinglong Bus Wiper Windshield Wiper Arm 750MM Length Replacement Bus Outside Body PartUS$ 32 - 32MOQ: 1 Piece
-
Dongfeng Kinland Wiper Blade 5205013-C0100US$ 1 - 500MOQ: 1 Set
-
Screen Wiper PressurizerNegotiableMOQ: 1
-
Universal Type Framesless Windscreen Wiper Blade,With Natural Rubber. P0003US$ 0.6 - 1.5MOQ: 1000 Pieces
-
Parts of Windshield(windsreen Hardware,motorcycle Fitting)NegotiableMOQ: 1
-
Universal Stainless Steel Factory Wholesale Car Wiper BladeNegotiableMOQ: 500 Pieces
-
Soft Flat Type of Windshield Wiper BladeUS$ 0.5 - 1.5MOQ: 1000 Pieces
-
Factory Wholesale Good Quality Frameless Wiper Blade, Windshield Wiper, Windscreen Wiper BladeUS$ 1.2 - 1.8MOQ: 200 Pieces
-
Waste Plastic and Rubber Crusher Machine Knife and BladeUS$ 9 - 9MOQ: 300 Pieces
