Contact Platform Support
Help CenterRear Side Draft Air Flow Standard Paint Booth Movable Infrared Energy Saving
Related Products
-
Exhaust Spray Bake Paint Booth Water Curtain With Explosion Proof LightsNegotiableMOQ: 1 Piece -
Orange Standard Body Shop Paint Booth 700052003400 MM Outside DimensionNegotiableMOQ: 1 Piece
-
Centrifugal Fan Standard Paint Booth Automotive Industrial EPS Wall Panel OEMNegotiableMOQ: 1 Piece
-
LED Lights Standard Paint Booth Coating , Commercial Spray Booth RentalNegotiableMOQ: 1 Piece
-
Economic Side Draft Standard Paint Booth Combined Mixing Room For GarageNegotiableMOQ: 1 Piece
Certification:CE, TUV
Rear Side Draft Air Flow Standard Paint Booth Movable Infrared Energy Saving
Features
1. Each unit with one 5.5kw fan for intake and exhaust.
2. Quality brand turbo fans, directly drive type.
3. Diesel burner heating system, and option for prep station.
4. Rear side draft air flow.
5, Continue line with rail on floor option.
6, Led light and Scheider electric components.
7, Moveable infrared on the ceiling option.
8, Different job in different position at the same time.
9, PVC curtain between the stations.
Advantage
Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, down air flow comes out, and extraction from rear side directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying,After painting, hot air goes from heating
generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. .
Below for Prep station:
| Item | Detailed Specification |
| Inside dimension | 6300×3450×2650 mm (L×W×H) |
| Outside dimension | 7550×3550×3100mm (L×W×H) |
| Plenum dimension | 6300×3450×450 mm (L×W×H) |
| Room body | Back side EPS wall panel, the other sides PVC curtain. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated. |
| Generator cabinet | Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | 1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter. |
| Roof | Galvanized steel |
| Control system | Fan switch, lighting switch, emergency stop. |
| Installs way | Hooked from roof by steel cable or supported by steel column. |
| Total power | 6.7KW (Power supply 1×220V, 3×380V, 50HZ) |
Below for spray booth:
| Item | Detailed Specification |
| Inside dimension | 6900×3900×2650 mm (L×W×H) |
| Outside dimension | 7000×5200×3400mm (L×W×H) |
| Front door | Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. |
| Emergency door | 1 units, 650×1800mm (W×H), colour: white. |
| Basement | Galvanized steel assemble, 300mm high, galvanized steel support, 2 rows grilles made by flat bar and twisted steel, silver colour, 3 rows indented plate, silver colour, 2 ramps, 520×2000mm/pc, silver colour. |
| Wall panel | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×36W, no side lights, with LED, lighting boxes are powered coated. |
| Generator cabinet | Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | Inlet:1×5.5KW turbo fan, air capacity for each fan: 21000m3/h. |
| Outlet: optional, 4m ducts, 1 pcs 900 bend. | |
| Heating system | BT18 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 180000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter. |
| Roof | Galvanized steel |
| Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start. |
| Total power | 7.5KW (Power supp |
Send Inquiry to This Supplier
You May Also Like
-
3point Hitch Adapter Quick Hitch Bushing SetUS$ 3 - 5MOQ: 1000 Pieces
-
Wholesale Truck Leaf Spring AssyUS$ 880 - 950MOQ: 5 Tons
-
Adjustable Shock Absorber for Navara 56110-EB71AUS$ 50 - 200MOQ: 1 Piece
-
Freightliner Torque Rod Bushing Freightliner Torque Rod Bushing Dump Truck Leaf SpringUS$ 1 - 18MOQ: 100 Pieces
-
ME294850 ME121023 Mitsubishi Lancer Mitsubishi Parts Mitsubishi Lancer Spare PartsUS$ 3 - 35MOQ: 1 Piece
-
Axle Lower Toyota Ball Joint 43340-39545US$ 1 - 3MOQ: 100 Pieces
-
Suspension Bushing for German High Lever Car 54551-22100/5455122100US$ 1 - 3MOQ: 50 Pieces
-
Suspension Bushing Type Engine Strut Mount 90250438US$ 1 - 10MOQ: 10 Pieces
-
Air Suspension Bellows 11Z24-09011US$ 20 - 60MOQ: 1 Piece
-
Shock AbsorberNegotiableMOQ: 100 Units
