Contact Platform Support
Help CenterVertical Drilling Machine WD-40A
Related Products
This machine is designed for drilling, counter boring reaming, tapping, spot facing, etc. The maximum drilling capacity is 40mm on small or middle sized workpieces. It is widely used in machine works and repair shops for single piece or small lot production, having the features of abundant horsepower and high rigidity when compared with all the others of its kind at home and abroad.
|
Feature
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1. A wide range of spindle speeds can be obtained by setting two levers at the left side of the spindle head in conjunction with tow-speed switch. 2. It has reasonable speed of revolution, there is well cutting property when it drill the bigger hole. 3. Two-speed switch can also permit the spindle to reversely rotate both at high and low speed so as to perform tapping at any speed. 4. All of the levers are locates on the spindle head for the convenient operation. 5. The spindle unit is equipped with the back moving spring and cutter dismounting device. The former can be adjusted to meet the requiremnet of the operator, and the latter is utilized for easily taking off the cutter. 6. The spindle head can be raised, lowered and revolver 360. The elevating mechanisms are acted through the worm and worm wheel gears and rack, thus saving the operator's labour and ensuring safety in self-locking. 7. The motor is mounted in the spindle head and its stator is fitted in the bushing for positioning the motor to facilitate mounting and dismounting in maintenance and repair. The power is transmitted to speed changing mechanism via splinted shaft. 8. All the essential cast parts have undergone artificial ageing, and the principal steel parts as spindle and its sleeve, clutch, drive gears, have been properly heat-treated. Therefore they are more stable and wear-resistant.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Send Inquiry to This Supplier
You May Also Like
-
Sandvik C3-DNI-VD30B-I Carbide CNC Inserts for High-Speed Steel MachiningNegotiableMOQ: 10 Blades -
Turning ToolNegotiableMOQ: 2500 Pieces
-
Carbide Insert Plastic Grid Box Tube Packaging With Plastic LidsNegotiableMOQ: 1 Piece
-
9pcs Indexable Carbide Turning Tools Set Inserts With Holder for Mini LatheNegotiableMOQ: 1
-
Professional Maufacturing KMJ-1914 Good Performance CNC Milling Cutter ,CNC Machine Turning ToolsNegotiableMOQ: 100 Pieces
-
Ceramic Cutting ToolsUS$ 10 - 100MOQ: 100 Pieces
-
Precision Cnc Turning Lathe Parts Custom Turning LatheUS$ 0.1 - 10MOQ: 10 Pieces
-
Tobacco Leaf Machine BladeUS$ 1 - 20MOQ: 10 Pieces
-
Insertion ToolsTUS$ 0.1 - 1.5MOQ: 5000 Sets
-
CNC PCD Diamond Cutting Tools InsertsUS$ 2 - 40MOQ: 10 Pieces
