304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
Certification:ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, SGS, SMC, CMC, CPA, CE,CMA,IMC
304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
1. Product description
UV lamp aging testing chamber is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.
2. Technical parameters:
Accelerated Weather UV test machine
|
Studio Size |
400W×1140D×390Hmm |
|
Outside dimension |
500W×1300D×1360Hmm |
|
Materials |
Inside and Outside SUS#304 stainless steel |
|
Temperature range |
RT+10~70°C |
|
Temperature uniformity |
±2°C |
|
Temperature fluctuation |
±0.5°C |
|
Temperature control |
PID SSR control |
|
Humidity range: |
≥90%RH |
|
Controller |
Korean TEMI 880 programmable controller |
|
Control mode |
Balance temperature humidity control (BTHC) |
|
Test cycle setting |
Illumination, condensation and water spray test cycle is programmable |
|
Lamp power |
40W/Piece |
|
Distance from sample to lamp |
50±2mm (adjustable) |
|
Centre distance between the lamp |
70mm |
|
Irradiance |
1.0W/cm2 |
|
Wavelength ultraviolet light |
UV-A: 315-400nm; UV-B: 280-315nm (8pcs, 1600h lifetime) |
|
Effective irradiation areas |
640×1140mm |
|
Irradiation black panel temperature |
50°C~70°C |
|
Standard Specimen Size |
75×150mm or 75×3000mm (special specitications to be described in the contact) |
|
Required water depth for water channel |
25mm, automatically control |
|
Testing time |
0~999H, adjustable |
|
Power |
220V/50Hz /±10% 5KW |
|
Protection system |
Overload short circuit protection, over temperature protection, water lackin |
3. Chamber Structure:
Accelerated Weather UV test machine
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.
4. Control System:
Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.
5. Test Specimen Mounting:
Accelerated Weather UV test machine
Send Inquiry to This Supplier
You May Also Like
-
Glass WoolNegotiableMOQ: 2500 Rolls
-
Self-fusing Electrical Silicone Rubber Hose Leak Waterproof High Pressure Plumbing Repair Tape Silicone Self Fusing TapeNegotiableMOQ: 1 Roll
-
Air Conditioner Refrigeration HVAC Electrical Insulation Tape Pvc Insulating Tape PVC Insulation TapeNegotiableMOQ: 1
-
Silicon Rubber Pad Thickness 1.0,silicon Pad for SublimationUS$ 5 - 50MOQ: 10 Pieces
-
Polymeric Insulator Fittings Y Style FittingUS$ 3 - 5MOQ: 1000 Pieces
-
Polyimide TapeNegotiableMOQ: 100 Rolls
-
Fiberglass ProfileUS$ 0.2 - 19MOQ: 3000 Meters
-
Wool Noil / Wool Waste / NoilUS$ 2.7 - 2.8MOQ: 15 Tons
-
SL-4050F Screw In Bus Bar Support Plastic Overhead Line InsulatorUS$ 0.1 - 5MOQ: 100 Pieces
-
Insulation Tape (NPTC-PVC)NegotiableMOQ: 1000 Pieces