Contact Platform Support
Help CenterPVC 270L Programmable Salt Spray Test Chamber For Corrosive Test Of Iron Metal
Related Products
-
Laboratory Environmental 270L PVC Salt Spray Test Machine 1600*500*1000mmNegotiableMOQ: 1 Piece -
Automatic Salt Spray Test ChamberUS$ 4499 - 7999/MOQ: 1 Piece
-
IEC68-2-52 / GB.10587-89 Salt Spray Test Chamber 270L With Full Automatic Detecting SystemUS$ 1100 - 1800 /MOQ: 1 Piece
-
600L Programmable Customized Electronic Salt Spray Testing Machine For Acid Corrisive TestUS$ 2499 - 3199/MOQ: 1 Piece
-
Salt Spray Test Chamber for Corrosion TestingNegotiableMOQ: 1 Piece
PVC 270L Programmable Salt Spray Test Chamber For Corrosive Test Of Iron Metal
Design standards:
ISO9227,CNS3627,3885,4159,7669,8886,JIS D-0201,H-8502,H-8610,K-5400,Z-2371,ISO 3768,3769,3770,ASTM B-117,B-268,GB-T2423,GJB 150.
Introduction:
Salt spray test chamber can determine the corrosion resistance of iron metal or the iron metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect.
Characteristics:
1,PID controller.
2,Entire PVC sheet material, the internal ring with the use of advanced three-dimensional flutter high technology products, strong structure, fresh, never deformation and
acid and alkali, high temperature and never aging, for salt spray, copper acetate, and other
test specifications.
3,Controller are in the same panel, the operation simple and clear.
4,Neutral salt spray (NSS), acetic acid salt spray ( AASS ), copper accelerated salt spray ( CASS )
either of the test laboratory
5,The cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
6,A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
7, Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
The Main Technical Parameter:
| Model: | LY-609-90 |
|
Inner Box Size (L×W×H) |
90×60×50 cm |
| Outside Box Size(L×W×H) : | 141×88×128 cm |
| Temperature Range : | 35°C~55 °C |
| Temperature Fluctuations : | ≤±0.5°C |
| Temperature Uniformity : | ±1°C |
| Brine Temperature : | 35°C±1°C |
| Spray Quantity : | 1.0~2.0 ml / 80cm2 / hr |
| Lab Volume : | 270L |
| Brine Tank Capacity : | 25L |
| Power : | AC220V,10A |
| Accessories : | Testing Salt/ Measuring tank/ Equipment each 1 set |
| Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board |
| Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1°C Corrosion-resistant Testing Method(CASS)63±1°C |
| PH | Salt Spray Method (NSS ACSS6.5~7.2)Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Multiple Safety Protection Devices : | Current discharge protection, over pressure protection,over temperature protection, over load fuse protection |
Send Inquiry to This Supplier
You May Also Like
-
Glass WoolNegotiableMOQ: 2500 Rolls
-
Self-fusing Electrical Silicone Rubber Hose Leak Waterproof High Pressure Plumbing Repair Tape Silicone Self Fusing TapeNegotiableMOQ: 1 Roll
-
Air Conditioner Refrigeration HVAC Electrical Insulation Tape Pvc Insulating Tape PVC Insulation TapeNegotiableMOQ: 1
-
Silicon Rubber Pad Thickness 1.0,silicon Pad for SublimationUS$ 5 - 50MOQ: 10 Pieces
-
Polymeric Insulator Fittings Y Style FittingUS$ 3 - 5MOQ: 1000 Pieces
-
Polyimide TapeNegotiableMOQ: 100 Rolls
-
Fiberglass ProfileUS$ 0.2 - 19MOQ: 3000 Meters
-
Wool Noil / Wool Waste / NoilUS$ 2.7 - 2.8MOQ: 15 Tons
-
SL-4050F Screw In Bus Bar Support Plastic Overhead Line InsulatorUS$ 0.1 - 5MOQ: 100 Pieces
-
Insulation Tape (NPTC-PVC)NegotiableMOQ: 1000 Pieces
