Contact Platform Support
Help CenterDouble Skin Clean Room AHU Return Air Handling Units Indoor Installation
Related Products
-
4 / 6 / 8 Row Double Skin Return Air Handling Units For Schools / HospitalsNegotiableMOQ: 1 Set -
Horizontal / Vertical Modular Residential Air Handling Units With 4 - 8 RowNegotiableMOQ: 1 Set
-
Energy Saving Fresh Industrial Air Handling Units With 30/50 mm PU InsulationNegotiableMOQ: 1 Square Meter
-
Super Slim Ceiling Hanging Chilled Water Air Handling Units 1500-5000m3/hNegotiableMOQ: 1 Set
-
Horizontal Package Fresh Air Handling Unit 4/6 Rows Cooling CoilNegotiableMOQ: 1 Set
Certification:AHRI ,CE，ISO9001,ISO14001,OHSAS18001
Double skin clean room ( AHU ) return air handling units indoor installation
EKDM air flow range is from 1000m3/h to 400000m3/h. Available functional sections include fresh/return air mixing section, cooling section, heating section, primary/medium/high efficiency filter section, electric heating section, humidifying section, sound attenuation section, heat recovery section, secondary air-return section, fan section, air diffuser section etc. Different combinations can meet different air handling requirements.
• The surface of the unit is made of quality color steel, which can resist corrosion, scratch and ultraviolet radiation.
• Internal panels are made of steel plates galvanized with aluminum and zinc, with an assured service life of more than 15 years. All panels feature end-to-end joints and smooth surfaces, without any bur or corroded point.
• The internal panels feature reinforced design, which is strong enough to support the largest air handling unit.
• The unit panel has two thicknesses, namely 30mm and 50mm.Inside the panel, hermetically foamed polyurethane (no fluorine) with a density of 48kg/m3 is used as the heat- insulating material. The heat conductivity factor is less than 0.02W/m°C.
• Each functional section of the unit is equipped with a steel trough base, thus ensuring it is well supported, easy to transport and assemble. The overall robustness of the unit meets the standard of CEN2.
Filter as below :
| China | Primary efficiency 5μm | Medium efficiency 1μm | Medium high efficiency 1μm | Sub-high efficiency 0.5μm | High efficiency 0.5μm | ||||||||||||
| GB/T14295 | 50% > Efficiency > 20% | 70% > Efficiency > 20% | 99% > Efficiency > 70% |
99.9% > Efficiency > 95% | Efficiency > 99.99% | ||||||||||||
| USA ASHRAE | C1 |
C2~ C4 |
L5 | L6 | L7 | L8 | M9 | M10 | M11 | M12 | M13 | M14 | H12-H16 | VH17 | VH18 | VH19 | VH20 |
| Europe | New standard |
G1 | G2 | G3 | G4 | F5 | F6 | F7 | F8 | F9 | H10 | H11 | H12 | H13 | H14 |
V15, V17 |
|
| efficiency | 65% | 80% | 80-90% | > 90% | 40% | 60% | 80% | 90% | 85% | 95% | 99% | 99.9% | 99.995% |
99. 995% |
99. 9995% |
||
| Old speci-fication |
EU1 | EU2 | EU3 | EU4 | EU5 | EU6 | EU7 | EU8 | EU9 | EU10 | EU11 | EU12 | EU13 | EU14 |
Specifciations
| Model EKDM |
Rated air flow m3/h | Windward area of coil (m2) | Air flow (m3/h) | Diameter of fan impeller mm | Fan performance | ||||
| 2.25 | 2.50 | 2.75 | 3.00 | Max. total pressure of fan Pa | Max. motor power kW | ||||
| m/s | m/s | m/s | m/s | ||||||
| 306 | 2000 | 0.23 | 1863 | 2070 | 2277 | 2484 | 160 | 1300 | 2.2 |
| 406 | 3000 | 0.34 | 2754 | 3060 | 3366 | 3672 | 200 | 1300 | 3 |
| 407 | 4000 | 0.41 | 3321 | 3690 | 4059 | 4428 | 225 | 1500 | 3 |
| 408 | 5000 | 0.48 | 3888 |
Send Inquiry to This Supplier
You May Also Like
-
Glove Making MachineNegotiableMOQ: 2400 Sets
-
Leather GlovesNegotiableMOQ: 1
-
Non Woven Shoe Cover Making MachineNegotiableMOQ: 1 Set
-
JIAPU Ultrasonic Glove MachineUS$ 15000 - 20000MOQ: 1 Set
-
Commercial Cotton Gloves Making MachineUS$ 3,000 - 4,000MOQ: 1 Set
-
China Hengtong Selling Best Quality "automatic Glove Machine"US$ 2,900 - 8,000MOQ: 1 Set
-
Automatic Glove Packing MachineUS$ 500 - 10,000MOQ: 1 Set
-
Automatic Plastic Pipe Extrusion Line For 16-630mm WaterPVC Pipe MachineUS$ 4 - 5MOQ: 1 Set
-
High Speed Storage Rack Roll Forming Machine With Cassette StructureNegotiableMOQ: 1 Set
-
Glove MachineUS$ 9,000 - 12,000MOQ: 1 Set
