Contact Platform Support
Help CenterG25/SG1.0 Cast Steel Grit_Surface Cleaning Material_Shot Blast Material
Related Products
-
G18/SG1.2 Cast Steel Grit_Surface Cleaning Material_Shot Blast MaterialUS$ 700 - 700MOQ: 1 Piece -
Steel Grit_sand Blasting Metal Abrasive Cast Steel Grit G50US$ 700 - 700MOQ: 1000 Pieces
-
Alloy Iron Shot S280US$ 700 - 700MOQ: 1 Piece
-
China Cast Steel Shot S230 With Diameter 0.6MM for SaleUS$ 500 - 500MOQ: 1 Piece
-
National Standard Steel Shot S230/ss0.6mmUS$ 500 - 500MOQ: 1 Piece
Cast Steel Grit Size:
G10,G12,G14,G16,G18,G25,G40,G50,G80,G120
Cast Steel Grit Operative Standards:
² GB/T18838.3-2008 Steel Shot and Steel Grit standards
² SFSA20-66Cast Steel Abrasive standards
² SAE J827 Cast Steel Shot standards
² SAE J1993High Carbon Steel Grit standards
² YB/T5149-1993 Cast Steel Shot standards
² YB/T5150-1993Cast Steel Grit standards
² ISO11124-3High Carbon Cast Steel Shot and Grit standards
Cast Steel Grit Major Technological Index:
Products
Cast Steel Grit
Chemical Composition
C 0.80~1.20%
Mn 0.35~1.20%
Si ≥0.40
S ≤0.05%
P ≤0.05%
Microhardness
GP:42-52 HRC
GL:53-60 HRC
GH:60-64 HRC
Hardness Deviation
Max Deviation ±3.0HRC
Microstructure
Tempered Martensite or Sorbite
Density
7.6 g/cm3
Cast Steel Grit Types:
GP:Angular when new, this grit rapidly rounds off in use and its particularly suited descaling applications.
GL:Although harder then GP steel grit, also loses its sharp edges during shto basting and is particularly suited to descaling and surface preparation applications.
GH:Having maximum hardness, GH always remains angular in its operating mix. These abrasive are particularly effective in surface treatment processes and produce a uniform, etched finish, GH angular grit should only be used in wheel machines where working requirements take precedence over cost price considerations (for example with rolling mill cylinders or when a special finish is needed). For use mainly with compressed air equipment.
Cast Steel grit Application:
Blast cleaning of cast steel shot:Used for blast cleaning of casting, die-casting,forging,sand removal of casting, steel plate, H type steel, steel structure.
Rust removal of cast steel shot:Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of forging.
Shot peening of cast steel shot:Shot peening of gear, heat treatment.
Shot blasting of cast steel shot:Shot blasting of profile steel,ship board,steel board,steel material.
Shot blasting of cast steel shot:Shot blasting of steel board, profile steel, steel structure.
Pre-treatment of cast steel shot:Pre-treatment of surface, steel board, profile steel, steel structure,before-painting.
Packaging & Shipping
1.25kg per bag ,40 bags in one palle
2.25kg per bag ,40 bags in one jumbo bag
3. 25kg per paper bag ,40 bags in one plywood pallet
4. One ton a bulk bags
Send Inquiry to This Supplier
You May Also Like
-
AbrasiveNegotiableMOQ: 2300 Pieces
-
Finishing Media Brown CorundumNegotiableMOQ: 1 Ton
-
Good Performance CBN Abrasive Sanding Belts for Steel ,alloyNegotiableMOQ: 50 Pieces
-
Milling and Polishing Material Brown Fused Alumina / Low Price Fused AluminaUS$ 200 - 680MOQ: 1 Ton
-
Floor Sanding Screen MeshUS$ 0.01 - 0.3MOQ: 1000 Square Miles
-
YDF-SS-330 Low Price Cast Steel Shot Price for Polish and GrindingUS$ 1 - 1,000MOQ: 1 Ton
-
Artificial DiamondNegotiableMOQ: 1
-
2016 Products Foshan Abrasive Manufacturer For Glazed Polishing Vitrified TileUS$ 3 - 4.5MOQ: 24 Pieces
-
Flap Wheel Small Sanding DiscsUS$ 0.12 - 0.48MOQ: 5000 Pieces
-
3mm Shank Pink Mounted StonesNegotiableMOQ: 1
