ISO Paint And Coating Salt Spray Test Chamber For Laboratory PID Controller

ISO Paint And Coating Salt Spray Test Chamber For Laboratory PID controller​

Introduction:

Salt spray test chamber can determine the corrosion resistance of iron metal or the iron metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect.

Design standards: 

ISO9227,CNS3627,3885,4159,7669,8886,JIS D-0201,H-8502,H-8610,K-5400,Z-2371,ISO 3768,3769,3770,ASTM B-117,B-268,GB-T2423,GJB 150.

Characteristics:

1,PID controller.

2,Entire PVC sheet material, the internal ring with the use of advanced three-dimensional flutter high technology products, strong structure, fresh, never deformation and

 acid and alkali, high temperature and never aging, for salt spray, copper acetate, and other

 test specifications.

3,Controller are in the same panel, the operation simple and clear.

4,Neutral salt spray (NSS), acetic acid salt spray ( AASS ), copper accelerated salt spray ( CASS ) 

either of the test laboratory

5,The cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.

6,A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.

7, Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.