Contact Platform Support
Help CenterWaterproof 21W Pneumatic Solenoid Coil for Packing Machine , OD 14.4mm DC24V
Related Products
-
Pneumatic Solenoid ValveNegotiableMOQ: 1 Set -
High Pressure Foam Sprayer Machine Automatic Roll Forming MachineNegotiableMOQ: 1 Piece
-
Gas Cutting Valve Pneumatic Solenoid Coil IP65 Lead Type DC 9 Volt 12 VoltNegotiableMOQ: 1 Kilogram
-
Solenoid Coil Pulse Jet Valves A051 400425101 Thermosetting Class FUS$ 8 - 14MOQ: 1 Piece
-
Nr 0200 Solenoid Valve Coils for Herion Solenoid Valve 2636000 2637050 8020865NegotiableMOQ: 1 Ton
Certification:CE/ISO9001
Solenoid valve coil for packing machine IP65 lead type inner diameter 14.4mm high 41.7mm DC24V 21W
Packing machine solenoid coil by Nijia are designed for welding machine valves . All solenoids of this system have the guide tube with a diameter of 14.4 mm. The Plunger diameter is 10mm .
This type solenoid coil,could be widely used to F , H series solenoid valve coil
The system is designed for use with air . Thermoset material will help the coil more stable and safely.
Specifications:
| Product NO. | NJ104 |
| Product type | Packing machine solenoid coil |
| Normal Voltage | DC24V |
| Normal Power | DC:21W |
| Insulation Class | F , H |
| Connection Type | Flying lead type |
| Applicability | packing machine series solenoid valves |
1 . class H wire 200°C according to IEC 317-13
2 . built-in magnetic yoke made by low carbon iron
3 . encapsulation with high quality specially designed glass filled nylon.
4 . heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material
The use of other materials is possible upon special agreements. All coils are rated to class F and to IP 65 (with connector) or IP67 for the flying lead version. The coil is designed and constructed in accordance to EN 60204.1 and VDE 0580 and it is suitable for industrial ambient conditions. For use in special ambients with high humidity, please, take contact with Amisco. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex nA II 3 GD T4 o T5).
Drawings:
Operator:
Plunger and core are made by a magnetic stainless steel specially designed for solenoid applications.
The guide tube is made with brass ( stainless steel is possible upon special agreement ).
The plunger is normally equipped with NBR rubber seals.
Other sealing materials like FKM are available upon demand.
The armature assembly is designed for more than 50x106 cycles.
Competitive Advantage:
1. High and stable quality
2. Quick delivery time
3. Enough stock
4. Good package in order to void the problems in transportation.
5. Best service from the whole company.
Send Inquiry to This Supplier
You May Also Like
-
1-5mw Mini Red Laser Module for Laser Alignment and Gun Laser SightUS$ 1 - 20MOQ: 10 Pieces
-
SUDA Mini Laser Garment Machine CNC LASER CUTTER---SL4030NegotiableMOQ: 1 Set
-
980nm ir Test Card of Infrared Laser(HT582)US$ 30 - 100MOQ: 100 Pieces
-
Laser Tube 100wUS$ 50 - 300MOQ: 6 Pieces
-
Laser 532nm, 5mw Dot Laser ModuleUS$ 7.6 - 8.9MOQ: 3 Pieces
-
RECI CO2 Laser Tube 100w 10000 Hours Working LifeUS$ 560 - 700MOQ: 1 Piece
-
New Original SF-HD80US$ 0.1 - 0.12MOQ: 1 Piece
-
Dual-Wavelength Fiber Laser for Medical Aesthetics: 1550nm + 1927nm, Synchronous Improvement of Deep and Superficial Skin Layers in One TreatmentNegotiableMOQ: 10 Units
-
Supply of Laser Heads, Output Heads, Laser Input Heads, Coupling Heads With High Efficiency and High Precision FOL-30KSUS$ 350MOQ: 1 Piece
-
10046088 Refractive Lens Resonant Cavity LensesUS$ 2900 - 3500MOQ: 1 Piece
