Bluetooth OLED Fingertip Pulse Oximeter Blood Oxygen Monitor Android IPhone

Bluetooth OLED Fingertip Pulse Oximeter Blood Oxygen Monitor Android iPhone

Name: Bluetooth Pulse Oximeter with OLED display

Precautions for use:

1.Please use two 5 AAA alkaline batteries or rechargeable batteries, do not use carbon or inferior battery.

2 . Please take out of the battery, if long time no use.

3 . Please timely replace batteries if low batteries indicator. Because battery supply deficiency may influence the measurement accuracy.

4.Please make sure the correct polarity direction to install battery, otherwise unable to boot.

Functions:

Common troubleshooting:

Electric indicator:

Safety classification: Medical electrical equipment protection according to the taxonomy of the genus the instrument for the II type BF equipment.

Power supply for DC 3 V.

Working environment, transportation and storage:

1. Normal working conditions

A ) Enviroment temperature: 5°C ~ 40 °C

B) Relative humidity:≤ 80%.

C ) Atmospheric pressure: 86kPa to 106kPa.

D)Storage

Good packed oximeters should be stored in a temperature of -40 ~ +70 °C, relative humidity 10%~95%, no corrosive gas and good ventilation indoor.

1.Specification:

1.1   Measurement Range

Spo2:                     0 -100%

Pulse Rate:            25 ~ 250 BPM

1.2   Resolution

Spo2:                     1%

Pulse Rate:            1BPM

1.3   Accuracy

SPO2 Accuracy:   2% (70-100%)

                              No defined (35-70%)                          

Pulse Rate             1% (25-250BPM)

Input Voltage:3V

Input Current: <40mA

2.Environment

2.1   Temperature

Working:0 ~ 45°C

Storage:-20~55°C

2.2   Humidity

Working:30~95%

Storage:10~100%

3.Standards

EN865                        Calibration specification for pulse oximeters

EN60601-1                Safety for medical equipment

EN60601-1-4             General safety standard