Contact Platform Support
Help CenterPiezo Active Buzzer 12V , Alarm Electronic Buzzers 110db Big Sound Speaker
Related Products
-
Wire 12VDC Piezo Alarm Buzzer , Electronic Buzzer 115db For AutomobileNegotiableMOQ: 1 Piece -
42*18MM 12V Active Piezo Alarm Buzzer With Wire Continuous Tone For CarNegotiableMOQ: 1 Piece
-
Wire Piezoelectric Transducer Piezo Alarm Buzzer 12Volt Active DriveNegotiableMOQ: 1 Piece
-
Min.100dB Piezo Alarm Buzzer 12V With Wire For AutomobileNegotiableMOQ: 1 Piece
-
Black Siren Piezo Alarm Buzzer 10V Piezo Transducer ABS Housing 1000HzNegotiableMOQ: 1 Piece
Certification:ISO9001 TS16949
Piezo Active Buzzer 12V , Alarm Electronic Buzzers 110db Big Sound Speaker
Quick Detail:
Size: D40mm*H20mm Operating voltage: 3 – 24 VDC Rated voltage: 12VDC Maximum rated current:20mA Minimum sound output: 110dB at 10cm Frequency: 2800Hz ± 500Hz Tone nature: Continuous Operating temperature: --20—+70℃ Storage Temperature:-30—+80℃ Weight: 12g
Specification:
1.Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H.,
Atmospheric pressure:860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure.
|
1 |
Rated Voltage |
12 VDC |
|
2 |
Operating Voltage |
3 – 24 VDC |
|
3 |
Rated Current |
Max.20mA, at 12VDC |
|
4 |
Sound Output at 30cm |
Min.110dB, at 12VDC |
|
5 |
Resonant Frequency |
2800±500 Hz |
|
6 |
Tone |
Continuous |
|
7 |
Operating Temperature |
-20 - +70℃ |
|
8 |
Storage Temperature |
-30 - +80℃ |
|
9 |
RoHS |
Yes |
|
10 |
Weight |
Approx 12g |
*Housing Material: Black ABS
3. Reliability Test
After any following tests the part shall meet specifications without any degradation in
appearance and performance except SPL. SPL shall not deviate more than -10 dB
from the initial value
(1)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
Resonant frequency, 1/2 duty Square wave.
(2)High Temperature Test
The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
(3)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
(4)Humidity Test
Temperature:+40℃±3℃ Relative Humidity:90%～95% Duration: 48 hours
and expose to room temperature for 6 hours
(5)Temperature Shock Test
Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)
Total cycle: 10 cycles
(6)Drop Test
Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,
three sides, six plain.)
(7)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes
Note:
As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it
4.Electrical And Acoustical Measuring Condition
Recommended Setting
Recommended Test Circuit
Packing
Send Inquiry to This Supplier
You May Also Like
-
ABB AF75-30-11RT-72 1SBL417010R7211 20-60V DC 3-Pole Contactor for Motor ControlNegotiableMOQ: 1 Piece
-
Circuit BreakerNegotiableMOQ: 2000 Pieces
-
Circuit Breaker MCCB AEG Circuit Breakers(SPQV-63C20)US$ 21.2 - 25.84MOQ: 50 Pieces
-
EZD100E3100N EZD100E Circuit BreakerUS$ 0.1 - 1MOQ: 1 Piece
-
(Circuit Breakers) S201D16 Hot Sales!!NegotiableMOQ: 1 Piece
-
30A Automatic Transfer SwitchUS$ 40 - 60MOQ: 1 Set
-
Rice Cooker Bimetal Disc ThermostatUS$ 0.1 - 1MOQ: 10000 Pieces
-
Reversible Thermo Sensor With Indicator Single-use in Center Part/Temperature Indicating and Recording LabeUS$ 90 - 180MOQ: 40 Cases
-
E-T-A Thermal-Magnetic Overcurrent Circuit BreakersNegotiableMOQ: 1
-
Electric Circuit Breakers Overload Protector Switch OP-01AUS$ 0.1 - 0.3MOQ: 1 Piece
