Contact Platform Support
Help Center30x20MM Black ABS Piezo Active Buzzers Alarm With Pins 90dB
Related Products
-
ABS Panel-Mounted Piezo Active Buzzer Siren Built In CircuitNegotiableMOQ: 1 Piece -
Black Active Buzzer 14MM 5V Piezoelectric TransducerNegotiableMOQ: 1 Piece
-
23x10MM 12V Active Buzzer Alarm Piezo Transducer 3500500 HzNegotiableMOQ: 1
-
Piezo Wire Alarm Siren Active Buzzer 12 V , 90dB Electric TransducerNegotiableMOQ: 1 Kilogram
-
24V ABS Piezo Active Buzzer Alarm With Wire , 95 dB Piezo TransducerNegotiableMOQ: 1 Piece
Certification:ISO9001 TS16949
30x20MM Black ABS Piezo Active Buzzers Alarm With Pins 90dB
Quick Detail:
Size: D30mm*H20mm SPL: Min.90dB at 2.8KHz/12VDC 1/2 Duty Square Wave/10cm Operating Voltage: 5-15VDCDescription:
buzzer Piezo Buzzer with build-in oscillating Piezo Buzzer 12V Buzzer 30mm Piezo BuzzerSpecification:
1.Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric
pressure:860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H.
Atmospheric pressure: 860 ～1060hPa) is regulated to measure.
|
1 |
Rated Voltage |
12 VDC |
|
2 |
Operating Voltage |
5 – 15VDC |
|
3 |
Rated Current |
Max.30mA, at 12VDC |
|
4 |
Sound Output at 30cm |
Min.90dB, at 12VDC |
|
5 |
Resonant Frequency |
2800±500 Hz |
|
6 |
Tone |
Continuous |
|
7 |
Operating Temperature |
-20 - +70℃ |
|
8 |
Storage Temperature |
-30 - +80℃ |
|
9 |
RoHS |
Yes |
|
10 |
Weight |
Approx 7 g |
*Housing Material: Black ABS
3. Reliability Test
After any following tests the part shall meet specifications without any degradation in
appearance and performance except SPL. SPL shall not deviate more than -10 dB
from the initial value
(1)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
Resonant frequency, 1/2 duty Square wave.
(2)High Temperature Test
The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
(3)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
(4)Humidity Test
Temperature:+40℃±3℃ Relative Humidity:90%～95% Duration: 48 hours
and expose to room temperature for 6 hours
(5)Temperature Shock Test
Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)
Total cycle: 10 cycles
(6)Drop Test
Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,
three sides, six plain.)
(7)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes
Note:
As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it
4.Electrical And Acoustical Measuring Condition
Recommended Setting
Recommended Test Circuit
Packing
Send Inquiry to This Supplier
You May Also Like
-
Power Cord & Extension CableNegotiableMOQ: 2600 Pieces
-
Power Cord Manufactuer Power Cord With Worldwide Certificates Power Cords Extesion Cords VDE /UC/SAA/KC/IMQNegotiableMOQ: 1000 Pieces
-
Power Cord VK31249US$ 0.1 - 1.99MOQ: 1000 Pieces
-
9FT Extension Cord in StockNegotiableMOQ: 1000 Pieces
-
Power Strip Unit IEC 320 C13 Outlet x4 / IEC 320 C14 InletUS$ 5 - 6MOQ: 500 Pieces
-
Fiber Patch CordUS$ 0.2 - 70MOQ: 50 Pieces
-
IP 67 Waterproof Cable Assembly 5cords UVUS$ 0.5 - 1.8MOQ: 1000 Pieces
-
Best Quality Brass Plug AdapterUS$ 0.1 - 10MOQ: 1 Piece
-
SAA 10A Extension Lead Socket for Australia Market With Heavty Duty CableUS$ 1 - 5MOQ: 1000 Pieces
-
Motor Driven Spring Driven Hysteresis Type Single Motor Reel Cable ReeUS$ 1000 - 3000MOQ: 1 Piece
