Supply of Burner

Introduction：

A burner is a device to generate a flame to heat up products using a gaseous fuel such as acetylene, natural gas or propane. Some burners have an air inlet to mix the fuel gas with air to make a complete combustion. Acetylene is commonly used in combination with oxygen.
It has many applications such as soldering, brazing and welding, the latter using oxygen instead of air for getting a hotter flame which is required for melting steel. For laboratory uses a natural gas fired Bunsen burner is used. For melting metals with melting points of up to 1100 °C such as copper, silver and gold a propane burner with natural drag of air can be used.
burner used for Industrial furnace heating. It consists of a set the wind shell with air inlet, the shell sets the wind even on both ends of the back seat and a burner nozzles, as described in case the wind sets are equipped with mixing tube, the open end of the mixing tube and burner diameter nozzle connected to the gas tube is inserted closed end and with the gas supply port connected on the back seat, as described on the mixing tube closed end and back walls of the Ministry and the open end of the circumference of the outer wall of the wind jet holes were laid.

Working Principle:
A burner is a device to generate a flame to heat up products using a gaseous fuel such as acetylene, natural gas or propane. Some burners have an air inlet to mix the fuel gas with air to make a complete combustion. Acetylene is commonly used in combination with oxygen.

/Solution/692.html

/Products.html

/Products.html