Contact Platform Support
Help CenterPort Powered RS232 To RS485 Converter
Related Products
-
RS232 To RS485 Converter Isolated Interface Asynchronous Half-duplexNegotiableMOQ: 1 Piece -
UT-201B Port-powered RS232 To RS485 Serial Converter Twisted -pairNegotiableMOQ: 1 Piece
-
UT-203 Twisted -pair / STP RS232 To RS485 Serial ConverterNegotiableMOQ: 1 Piece
-
UT-2016 RS232 To RS485 Serial Converter , Protocol ConvertersNegotiableMOQ: 1 Set
-
UT-206 RS232 To RS485 Serial Converter With Photoelectric IsolationNegotiableMOQ: 1 Piece
Certification:CE,FCC,ROHS
Port Powered RS232 To RS485 Converter
Specifications:
Capabilities parameter
Interface feature: RS-232C,RS-422 standard interface compatible with EIA,TIA
Electric interface: RS-232 end DB9 hole connector, RS-422 end DB9 needle connector, with connection pole
Working mode: asynchronism Full-duplex difference transmission
Transmission media: twisted -pair or STP
Transmission rate: 300-115.2KBPS
External discharge dimension: 63mm X33mmX17mm
Working circumstance : - 25 to 70 degree C, relative humidity 5% to 95%
Transmission distance: 1,200mm (RS-422 end),5m(RS-232 end)
Connector an signal:
RS-232C bay-line distribution
|
DB9 Female(PIN) |
RS-232C Interface Signal |
|
1 |
Protective |
|
2 |
RXD SIN |
|
3 |
TXD SOUT |
|
4 |
DTR |
|
5 |
GND |
|
6 |
DSR |
|
7 |
RTS |
|
8 |
CTS |
|
9 |
RI |
RS-422 data output & connector and bay-line distribution
|
DB9 Male (PIN) |
Data Output |
RS-422 Full-Duplex |
|
1 |
T/R+ |
(A+) |
|
2 |
T/R- |
(B-) |
|
3 |
RX+ |
(A+) |
|
4 |
RX- |
(B-) |
|
5 |
GND |
Ground Wire |
|
6 |
VCC |
+5V Standby Power input |
Description:
In order to carry through remote digital communication between computers with various standard series interfaces converter facilities or intelligent instruments, it needs inter exchange of standard series interface converter of compatible RS-232C and RS-422 standard is able to convert mono-end RS-232 signal to balance difference RS-422 signal and extend the communication distance to 1.2km. No external power but adopts a particular RS-232 charge pump to drive the system, and gains electricity without initializing the RS-232 series interface. An internal zero delay auto transceiver and particular I/O circuit automatically control the data stream direction in stead of an handshake signal (for example RTS, DTR etc).There by in guarantees the function under RS-422 without changing the program compiled under RS-232 Full-duplex mode and assures the adaptation to current operation software and interface hardware. The transmission rate of 300-115.2kbps. Is capable of applying between host computers, host computer and is extensions or external equipment and forms Point-to-point or point-to-multipoint remote and multi-communication network, It implements multi-machine response communication and commonly used in systems of industrial automation control all-one-card. Door safe, car parking, ATM, bus charge, eatery sell out, staff attendance management, and toll highway etc.
Send Inquiry to This Supplier
You May Also Like
-
Wire HarnessNegotiableMOQ: 2300 Sets
-
4mm Banana Patch CablesNegotiableMOQ: 1000 Pieces
-
Electronic Wire to Board 2.54 Pitch Connector Wiring HarnessNegotiableMOQ: 10000 Pieces
-
Electric Custom Truck Engine Wire Harness Assembly 504389794 For IVECONegotiableMOQ: 1
-
Digital Power Amplifier Car Amplifier Wiring KitUS$ 2 - 10MOQ: 200 Sets
-
Motorcycle Huoniao HN125-8 Wiring LoomNegotiableMOQ: 1 Piece
-
Eco-Friendly All Size Automotive FuseUS$ 1 - 1MOQ: 100 Pieces
-
Wiring HarnessesNegotiableMOQ: 1 Unit
-
Conductive Guide LineNegotiableMOQ: 500 Pieces
-
Electrical Connector Wire HarnessUS$ 4 - 5MOQ: 500 Pieces
