Home > Products > RS232 To RS485 Serial Converter > UT-2017 RS232 To RS485 Serial Converter , Asynchronous Full Duplex
UT-2017 RS232 To RS485 Serial Converter , Asynchronous Full Duplex
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
- factory gain with TS16949 control arm bushing for Opel oe number 90 235 042
- lower arm bushing sed for Japan parts
- premier quality engine mount for mitsubishi OEM ME011832
- support center bearing pto shaft center bearing 37230-35120
- bimetal stainless bush with high quality
- professional OEM silicone bush spare parts used for car OE 48815-26060
Product Details
Brand Name: | UTEK | Place of Origin: | China | Model Number: | UT-2017 |
Product Description
Certification:CE,FCC,ROHS
UT-2017 RS232 To RS485 Serial Converter , Asynchronous Full Duplex
Signal indication: 3 pilot lamps for Power (PWR), Send (TXD) and Receive (RXD).
Transmission media: twisted pair cable or shielded cable.
Dimensions: 63mm×33mm×17mm.
Working circumstance: -25℃to 70℃, relative humidity 5%-95%.
Description:
Compatible with the Recommended Standards of RS-232C, RS-485, UT-2017 photoelectric isolation interface converter can convert the single-ended RS-232 signal into balance differenced RS-485 signal. The built-inphotoelectric isolator can provide an isolation voltage of as high as 2500Vrms. Also, there is a rapid transient voltage suppression protector for protection of RS-485 interface with advanced TVS(TRANSIENT VOLTAGE SUPPRESSOR) technology adopted. Under normal conditions, the TVS tube is in the state of high resistance. However, when both ends of the TVS tube are hit by a transient high energy,the impedance at both ends can be depressed by the TVS at a very high speed,and after absorbing a high current, the voltage between the two ends is suppressed and kept at a pre-set value, therefore no damage is caused to the electrical components behind by the transient high voltage impact. The protector can effectively restrain lightning or ESD (electro static discharge) with a protection voltage of 600W on each line for lightning surge and surge voltage or transient over voltage possibly caused up by various reasons, and at thesame time, a high-speed transmission of RS-485 interface is ensured by the tiny capacitance between the poles. Through a DB9 female connector RS-232 interface is connected to other interfaces compatible with RS-232C standard, and for RS-485 interfaces RJ-45 and 4PIN connector is to be used for connection. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically without any handshaking signal (for example RTS, DTR etc). The converter is plug-and-play without any jumper settings needed for mode shift between full duplex half duplex (RS-485).
The converter is applicable for all the existing communication software and interface hardware without any software modifications for the previous working mechanism based on RS-232.
A reliable and stable point-to-point and point-to-multipoint communication can be ensured by UT-2017 photoelectric isolation interface converter. For point-to-multipoint communication, as many as 32 interface facilities of RS-485 standard can be connected
to each converter, and a high data transmission rate of 300-115.2Kbps can be achieved. Power indicator light and data traffic indicator light are also available with the converter for malfunction indication. Two conversion communication modes including RS-232 to RS-485 are supported.
Specifications:
Performance parameters
1. Interface characteristic: compatible with the standards of RS-232C and RS-485 issued by EIA/TIA.
2. Electric interface: DB9 female connector for RS-232 interface input end, RJ-45 and 4PIN connector for RS-485 interface output end.
3. Protection grade: ±15KV ESD protection for RS-232 interface, and 600W surge protection each line for RS-485 interfaces.
4. Isolation degree: isolation voltage 2500Vrms 500DC non-stop.
5. Operation mode: asynchronous half duplex or asynchronous full duplex.
6. Signal indication: 3 pilot lamps for Power (PWR), Send (TXD) and Receive (RXD).
7. Transmission media: twisted pair cable or shielded cable.
8. Transmission rate: 115.2K BPS to 300M, 38.4K BPS to 2.4KM and 9,600 BPS to 5KM.
9. Dimensions: 63mm×33mm×17mm.
10. Working circumstance: -25℃to 70℃, relative humidity 5%-95%.
11. Transmission distance: 0-1,200meters (115,200bps-9,600bps).
Connector and signal
RS-232C bay-line distribution
DB9 Female(PIN) |
RS-232C Interface signal |
1 |
Earth protection |
2 |
Receive data SIN(RXD) |
3 |
Send data SOUT (TXD) |
4 |
Data terminal ready DTR |
5 |
Ground signal GND |
6 |
Data setting ready DSR |
7 |
Request send RTS |
8 |
Contact Us
- UTEK TECHNOLOGY GROUP
- Contact nameMs. Renee Liu
- Phone86-755-27886063
- Address6 floor, C building, Jia An Industrial Zone Weinan,Shaanxi
- VIT-SA Truck Parts 4802040020 Valve EBS Trailer Brake Valve
- VIT-SA EBS Proportional Relay Valve 4802020040, A0054296944
- VIT-SA Truck Auto Spare Parts 4800014010 EBS Electronic Braking System Brake Signal Transmitter Truck Spare Parts
- VIT-SA Original Knor EBS K050211N00 Truck Spare Parts
- VIT-SA Truck spare parts EBS Dual Channel Module K093192 21114976 22225554
- VIT-SA Original 2S/2M EBS ES2095 modulator K110610V01N99 valve cable for trailer K010710N00
- VIT-SA Matic Expansion Module PEM Valve For Schmitz Cargobull 4801020640 4615130020 3413352
- VIT-SA K021204 81521066049 EBS Single Channel Module
- VIT-SA Truck Trailer Control Valve EBS 4802040310 for 1747137
- VIT-SA EBS Single Channel Module K050211N50 Truck Parts
- VIT-SA Original WBC 4801041070 Valve EBS 81521066066 EBS Modulator
- VIT-SA Truck Trailer Control Valve EBS 4802040310 Truck Parts
- VIT-SA Original 4S/2M EBS American Truck Parts 842003001 22111000211
- VIT-SA Truck Parts Pressure Regulator EBS 81521066049 K021204 K021204N50
- VIT-SA EBS Axle Modulator 4801061040 Original 2-Channel Truck Parts
- VIT-SA EBS Electronic Control Unit 4461352420, Suitable For 5802310929
- VIT-SA EBS Modulator Valve Original Modulator Ebs 2 Channels K020024 K020024n50
- Factory Made Brake hardware bolts for CV disc brake pad kits
- Free Sample Forks for CV Disc Brake Repair kits Component
- Nice Hold down Springs for CV Disc Brake Pad Repair kits
- Heavy bracket press plates of Components of CV Disc Brake Pad Repair kits
- China manufactured CV Truck|Bus|Trailer brake repair kits installation kits
- Factory direct Stamping Backing Plates for CV Truck|Bus disc brake pads
- Casting Steel Backing Plates of CV Truck|Bus disc brake pads
Popular Searches
- Trailer Slack Adjuster
- metal side adjuster
- freightliner brake drum
- wabco relay valve 9730010100
- repair kit haldex
- hyundai county bus parts
- all adjustable
- alloy ajust
- anime adjuster
- artist adjuster
- artists adjustment
- as ajustment
- auto adjuster 2012
- adjuster for accelerator
- back adjuster 2012
- bar adjuster
Find Similar Products By Category
- Transportation > Truck Parts > Truck Brake
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Ms. Renee Liu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-