UT-2278SM , Multi-mode Fiber to Serial Converter ST Interface
Certification:CE, FCC, ROHS
UT-2278SM , Multi-mode Fiber to Serial Converter ST Interface
Fiber interface:ST interface(SC/FC can be customed)
Interface:Supports RS-232/RS-485/RS-422 interfaces
Asynchronic transmission:point-to-point with a rate as high as 460KBPS
Working wave length:1310nm(multi-mode)
Description:
Being a multi-function fiber modem in support of asynchronism RS-232, RS-488 and RS-422 communication interface, UT-2278 is the best choice for the connection from remote terminal unit (RTU) to host (HOST) or Supervisory Control and Data Acquisition (SCADA). It supports multiple asynchronism communication protocols including RS-232, RS-485 and RS-422, and it also supports a combination of two of the RS-232, RS-485 or RS-422 interfaces as well as both of the working modes, i.e. two-line (half-duplex) RS-485 and four-line (full duplex) RS-422. The ability to support RS-485 mode for data TXD or SD sending control greatly improves its compatibility with various kinds of software besides a sharp simplification of control method. Various kinds of fiber connection between asynchronism serial interfaces are supported by UT-2278 fiber modem. Both half duplex and full duplex communications through fiber between two asynchronism interface devices are supported with a communication distance as far as 4 kilometers for multi-mode and 20 kilometers for single-mode. The transmission rate for RS-232 can reach a maximum of 115.2KBPS, while for RS-485/RS-422 a maximum of 460KBPS can be achieved. Interfaces of different electric standards can be mixed for use with nice EM/RFT performance, e.g. RS-232 devices can be connected to RS-485/RS-422 devices, and the interface converter or photoelectric isolator can be replaced from RS-232 to RS-485. Two data signal transmissions are supported by UT-2278: data sending and data receiving. At the same time, automatic control circuit is also provided for Rs-485/RS-422 data transmission. Zero delay for converting time is achieved. ST interfaces are used for fiber connection.
Specifications:
|
Interface |
Supports RS-232/RS-485/RS-422 interfaces. |
|
Asychronic transmission |
Point-to-point with a rate as high as 460KBPS |
|
Transmission distance |
4,000 meters for multi-mode and 20,000 meters for single-mode |
|
Working temperature |
-40℃ to +80℃, relative humidity from 5% to 95% |
|
Working wave length |
1310nm(multi-mode) and 1310nm(single-mode) |
|
Electric interfaces |
RS-232: pole-shaped connector RS-485/RS-422: pole-shaped connector |
|
Fiber interface |
ST interface(SC/FC can be customed) |
|
RS-232 interface features |
Standard RS-232 three line interface ±15KV(anti-static), ESD protection, maximum rate of 115.2KBPS Input voltage AC100-24V/1W |
|
RS-485/RS-422 interface features |
Self-adaptive interface technology enables the self adaptation of rate regulation from interface, no switch needed, and the ±15KV(anti-static) ESD protect supports as much as 32 points of polling. And 600W surge protection each line for RS-422 and RS-485 interfaces. |
Connector and signal
|
Connector (PIN) |
Signal |
RS-422 Full-duplex |
RS-485 Half-duplex |
|
1 |
T/R+ |
Send(A+) |
RS-485(A+) |
|
2 |
T/R- |
Send(B-) |
RS-485(B-) |
|
3 |
RXD + |
RXD(A+) |
N/C |
|
4 |
RXD - |
RXD(B-) |
Send Inquiry to This Supplier
You May Also Like
-
Hand Tool SetNegotiableMOQ: 2700 Sets
-
6 PCS Changeable Hollow Punch SetUS$ 1 - 30MOQ: 1200 Sets
-
Equipped Toolkit for Home UseUS$ 9.5 - 10.2MOQ: 1 Piece
-
78 PCS Socket Set(1/4" &1/2")US$ 28 - 38MOQ: 10 Sets
-
Thread Repair Tool Rethreading Tool Kit Thread Repair Kit Most PopularUS$ 5 - 28MOQ: 1000 Sets
-
Tag Pin, Tag Gun, Loop PinNegotiableMOQ: 1
-
Handle Tools or Multi-toolsUS$ 2.5 - 4.5MOQ: 2000 Pieces
-
4 Screw Driver Set Tool Kit Mini Screwdriver Set For RC Helicopter CarUS$ 1 - 10MOQ: 100 Pieces
-
24pc Precision Ratchet Screwdriver SetUS$ 2.74 - 7MOQ: 2000 Sets
-
Special Tools Wrench C Special SpannerNegotiableMOQ: 1 Piece