Contact Platform Support
Help CenterSegmented Metal Silicon Carbide Sanding Belts For Heavy Duty Sanding
Related Products
-
Silicon Carbide Grit 100 Sanding Belts Abrasives For Panel IndustrialNegotiableMOQ: 1 Piece -
Cloth Backed Segmented Silicon Carbide Sanding Belts On Wide PanelsNegotiableMOQ: 1 Set
-
Wide Silicon Carbide Sanding Belts Abrasive With Anti Loading CoatedNegotiableMOQ: 1 Piece
-
Glass Metal Silicon Carbide Sanding Belts Cloth Backing / Full Resin , 1600mmNegotiableMOQ: 1 Set
-
Polyester Silicon Carbide Wide Sanding Belts For Metal / GlassNegotiableMOQ: 1 Piece
Segmented Metal Silicon Carbide Sanding Belts For Heavy Duty Sanding
Quick Detail:
WEEM premium segmented wide belt is special make and mark 1128. It make with heavy duty YY weight polyester backing place premium silicon carbide gain, Special design for heavy duty MDF boards’ surface sanding. With custom sectional belt, WEEM make into belt’s length up to 3200mm with 2 joints. Best Choice for Surface Finishing of MDF, Particleboard and Plywood Panels.
Description:
WEEM premium segmented wide belt is Special design for heavy duty MDF boards’ surface sanding. Therefore when we chose the right backing to sustain cross-direction strength, YY weight waterproof polyester backing is the best choice. This is a type of cloth backing provided both stiffness strength and tensile strength, idea for sectional belt requirement. Anti-static treatment made on backing to delay or prevent loading problem.
Care selection of gains, only premium silicon carbide is selected. Silicon carbide is a very hard and crystal structure produces a fine straight edged grind lines. It is superior for its ability to penetrate with light cutting pressures. SiC is primarily used for grinding nonferrous materials such as brass, copper, bronze, and wood, glass, rubber and plastics. It is also used to finish polyurethanes, primers, lacquers and sealers. And use closed coated technique bond on the backing to ensure the grinding and durable needs. A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.
A sectional belt or segmented belt is custom make to your ordered. For panel industrial, the belt size can be 1950mm x 3200mm or 2650mm x 3200mm etc.
A strong bi-direction tape splice is used. Joint of WEEM premium MDF segmented belt offer 2 types of joints
Tap on gain line joint: as default.
Tap on butt line joint:
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/
Specifications:
|
Backing: |
YY weight waterproof polyester |
|
Treatments: |
Anti-static |
|
Coated: |
Close coated |
|
Grain: |
Silicon Carbide |
|
Grit: |
P40~P220 |
|
Width: |
1828mm/72” ~ 3300mm/130” |
|
Length: |
Customer specific |
Competitive Advantage:
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma etc. it offer great performance and durable with heavy duty grinding and sanding needs.
Send Inquiry to This Supplier
You May Also Like
-
Straw Pellet Mill/biomass Wood Pellet Burner/pellet Burner for Industry UseUS$ 2,700 - 2,900MOQ: 1 Set
-
Factory Price Waste Oil Burner Used in Heating SystemUS$ 400 - 900MOQ: 1 Unit
-
Fuel Injector NozzleUS$ 1 - 10MOQ: 10 Pieces
-
SAACKE Burner and BoilerNegotiableMOQ: 1
-
Flat Punching Dish Head With Manual Hole for Gas Steam BoilerUS$ 200 - 2,000MOQ: 2 Pieces
-
STEAM PRV (pressure Reduce Valve)US$ 1,000 - 10,000MOQ: 1 Set
-
Porcelain Enamel Bare CylinderNegotiableMOQ: 200 Sets
-
Stainless Steel ss Studded Tube 12CRMOVUS$ 100 - 2,000MOQ: 1 Piece
-
SKP55.003E2 Valve Actuator SKP75.003E2 Gas Solenoid Valve ActuatorUS$ 20 - 2200MOQ: 1 Piece
-
Pure Oxygen BurnerNegotiableMOQ: 1 Piece
