Ceramic/Metal/Plastic Structured Packing

Ceramic structured packing:1) High capacity, high separation efficiency, low pressure drop, large flexibility2) Suitable for all tower diameters3) Acid resistance: 99.9%4) Alkali resistance: 92% 5) Temperature: 0 - 1,300°C6) Mesh hardness: ≥7.7) This product is able to applied to the drying tower, absorbing tower, cooling tower, desulphurization towers, rectifying tower, washing tower and regenerative tower in petrol-chemistry, chemical engineering, coal chemical engineering, elaborate chemical engineering, fertilizer, sulphuric acid, smelting, electrical power and environmental protection industries 8) Specification: Φ100 C 7,500mm9) We can also design and produce according to the clients' requirements Metal structured packing:1) Sheet metal packing: sheet metal structured tower packing provides high capacity, wettability and low pressure drop in a number of distillation, absorption and liquid/liquid extraction applications including: a) Refinery columns (atmospheric and under vacuum) b) Petrochemical columns c) Natural gas glycol dehydration d) Wastewater treatment stripping columns e) Atmospheric pressure and high pressure columns2) Woven structured packing: woven structured packing is excellent for applications that require a large number of theoretical stages, lower pressure drop and small overall packed bed heights. The KAITE packing is manufactured from specially woven wire gauze that is pressed into smooth plates, uniformly perforated, corrugated and stacked with corrugations in alternate directions. This construction promotes intimate gas/liquid contact Proved applications include:1) Pharmaceuticals2) Fine chemicals3) Flavors and fragrances4) Electronic chemicalsPlastic structured packing:1) The KAITE 125.X, 125.Y, 250.X and 250.Y (further types on requests) are also available in different kinds of thermoplastics 2) Werkstoffe / materials: polypropylene (PP), postchlorated polyvinylchloride (PVC-C), polyvinylide-nedifluoride (PVDF) 3) The plastic versions of KAITE have proved operational record in various types of absorption and desorption columns Special features:1) Large number of transfer units per meter, low HTU, depending on the systems 2) Small pressure drop per meter packed height 3) Most economical load range up to F factor 3Pa4) Maximum operating temperatures: a) About 110 for PP b) About 150 for PVDF Product applicants:1) HCL absorbers2) SO2 absorbers3) Flue gas cleaning4) Sea water deaeratorsGauze packing (KAITE plastic gauze packing, type BX): The plastic gauze packing has been used industrially with great success for many years. The special gauze structured provides a very good wettability, even in aqueous systems. The packing is used primarily for columns with low liquid loads.Special features:1) Large number of transfer units per meter, low HTU, depending on the systems 2) Minimum pressure drop, typically 2 - 4mBar/m 3) Minimum liquid load approx. 0.05m³/m²h4) Self-wetting packing surface, even for aqueous solutions 5) Operating temperatures up to 80°, depending on the chemical components Preferred applications:1) Small liquid loads2) Increasing performance of existing columns3) Columns with small overall heightProduct applicants:1) Methanol absorbers2) Isopropanol absorbers3) Dimethylformamide absorbers4) Formaldehyde absorbersIn the column the structured packing are put side by side, different levels are turned at 90°. The outer packing segments for a round column cross-section are precisely cut. In the case of PP-HT temperatures of approx. 100°C are allowed for long term operation. producing area:China payment:T/T, irrevocable L/C at sight