Contact Platform Support
Help CenterGentiger Vertical Milling Machine
Related Products
-
Gentiger - High Speed Double Column Machining CenterNegotiableMOQ: 1 Piece -
Gentiger - CNC Milling High Speed Machining CenterNegotiableMOQ: 1 Piece
-
Gentiger - CNC High Speed CNC Milling MachineNegotiableMOQ: 1 Piece
-
Gentiger - High Speed 5 Axes Machining CenterNegotiableMOQ: 1 Piece
-
Gentiger - Vertical Milling MachineNegotiableMOQ: 1 Piece
|
Outstanding Features: |
|
Ruggedly built turret type milling head. The spindle is one piece machined from SCM-21 alloy steel, carburized, tempered and precision ground. The spindle runs on high precision P4 class bearing. Fitted with forced lubrication system for gears, clutch, and bearings inside the milling head for low noise running and long service life of head parts. The milling head can be swivelled 45° to the right and left. It is quickly locked and loosened by double screws and clamping ring. Constructed of high quality castings FC-30 and Fcd-45, rib reinforced, tempered, and stress relieved for maximum rigidity without deformation. The table is manufactured from high quality cast iron FC-30. The table surface and slideways are tempered, high frequency hardened, and precision ground. The T-slots are precision machined. The 6 surfaces on 3 T-slots are precision ground to within 0.01mm accuracy in full way, permitting for fast milling operations. The X, Y axis feeds are driven by high precision C5 class preloaded double nut ball screws with tightening function, providing smooth feed, minimum backlash, and superior positioning accuracy. The X-axis feed is driven by a 1000W AC servo motor and the original driver, incorporated with a magnetic clutch for safe, powerful, fast, stable and quiet traverse. Automatic feed speed range is 0 - 1500 mm/min. Rapid feed speed as high as 3500mm/min. An installation space is left for a Y-axis servo motor, providing convenient fitting at any time (OPTIONAL EQUIPMENT) The X, Y axis slideways, dovetailed surfaces and gibs are coated with Turcite-B, precision scraped for long term accuracy and maximum wear resistance. Precision chip wipers protect the x, Y and Z axis ways for scratch free traverse. The digitally displayed, timer controlled lubricator provides automatic lubrication to the X, Y, Z axis slideways, feed screws, gears and bearings. The oil supply time and lubrication interval can be set. An oil manifold ensures uniform lubrication to the parts. |
|
MODEL
|
SHCM-S96RA
|
SHCM-S96RVS
|
| Spindle speeds |
75~3600 RPM 16 STEPS
|
60~3600 RPM VARIABLE SPEED (MAX.4050 RPM)
|
| Spindle nose taper |
NST 40
|
NST 40
|
| Head tilt (R & L) |
45° (R & L)
|
45° (R & L)
|
| Overarm travel |
410 MM
|
410 MM
|
| Quill travel |
140 MM
|
140 MM
|
| Distance from spindle nose to table |
0~530 MM
|
0~530 MM
|
| Distance from spindle center to column |
170~580 MM
|
170~580 MM
|
| Automatic spindle feed speed |
0.035/0.07/0.14 MM (PER REV.)
|
0.035/0.07/0.14 MM
(PER REV.) |
| Table area |
1250 x 280 MM
|
1250 x 280 MM
|
| Longitudinal travel |
750 MM
|
750 MM
|
| Gross travel |
400 MM
|
400 MM
|
| Vertical travel |
440 MM
|
440 MM
|
| T-slot (Width x No. x Distance) |
16 x 3 x 65 MM
|
16 x 3 x 65 MM
|
| Automatic lougitudinal travel |
0-1500 mm/min
|
0-1500 mm/min
|
| Quick lougitudinal travel |
3500 mm/min
|
3500 mm/min
|
| Quick vertical travel |
1150 MM
|
1150 MM
|
| Spindle |
2.2 KW (3HP)
|
3.7 KW (5HP) VARIABLE SPEED MOTOR
|
| Knee |
0.75 KW (1HP)
|
0.75 KW (1HP)
|
| Lubrication pump |
75 W
|
75 W
|
| Magnetic pump |
13 W
|
13 W
|
| Machine dimensions |
1900 x 2260 x 2305 MM
|
1900 x 2260 x 2305 MM
|
| Packing dimensions |
1460 x 1920 x 2030 MM
|
1460 x 1920 x 2030 MM
|
| N.W. |
2400 KG
|
2450 KG
|
| G.W. |
2800 KG
|
2850 KG
|
Send Inquiry to This Supplier
You May Also Like
-
Original SEM 5371494 Sealing Ring Kit 0.4kg for SEM Machine With Good PriceUS$ 12.12 - 12.75MOQ: 10 Units
-
In Stock MTU Spare Parts 3520170053 PROTECT.SLEEVENegotiableMOQ: 1 Ampere
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Filter 4110000697003 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
PC200-6 Excavator H-Link Bucket Linkage Arm 3.0-85 YNF18363NegotiableMOQ: 1 Piece
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Durable Model 1460A053 Fuel Injection Pump Mitsubishi High-pressure Fuel Pump 294000-1370US$ 370 - 410MOQ: 1 Unit
-
SY03 Heavy Duty Ripper for Mini Excavator Rock and Hard Soil BreakingUS$ 150 - 2000MOQ: 1 Piece
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
