T2 20W Fluorescent Compact Light Bulbs E27 With PBT Materials 6400K Daylight

T2 Full Spiral 20W 1200 LM P.F. > 0.5 Super Mini Compact Fluorescent Lamps 6400K Daylight

Features

1 . Wattage : 20W

2 . Solid Mercury Technology

3 . 100% triphosphor A - grade powder

1 ) Luminous efficency: > 60 lm / w

2 ) Brightness maintance: > 80% after 2000H

3 ) CRI : > 80 Ra

4 ) SDCM : < 5

4 . P.F. : > 0.5

5 . Power consumption: < 10%

6 . Lead free glass tube

7 . Compact type , integrate the ballast in the lamp

Lamp parameters

Description

1 . Passing the EMC test .

2 . Guarantee is for 2 years .

3 . Turn on – off time is more than 12 000 times .

4 . Living up to the IEC60968 & 60969 standard .

5 . The average lifetime of our lamp is at least 6000h .

6 . Can start under the condition of - 30 ℃ and low voltage .

7 . No mercury vapor , using solid mecury technology , Hg < 3mg

8 . No flicker , No noise , No electromagnetic interference ( EMI ) .

9 . Using nickleplated aluminum base , very good to avoid getting rusted .

10 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .

11 . For the pack , we have color box , single blister , double blister . 80% electricity compared to traditional incandescent bulbs .

12 . Voltage : Both 110 - 130V and 220 - 240V available with 50 / 60Hz ; Wide range voltage is possible .

13 . Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance .

14 . The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .

15 . Easy to apply , can change traditional incandescent bulbs directly , the ballast in integrated in to the lamp .

Competitive advantage

1 . Strict raw materials inspection .

2 . Technical parameter adjustment :

     1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

     2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

     3 ) Turn on off test , to make sure the life time of the lamp

     4 ) Start test in low temperature and low voltage ( light in the fridge )

3 . In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

4 . After laoding the container,we will trace the life time of ech order,we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

5 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PC