Contact Platform Support
Help CenterHeat Treatment Copper Nickel Tube Heat Exchanger Piping OD 4.00MM - 76.2MM
Related Products
-
OD 19.05 x 1.65MM Admiralty Seamless Brass Tube BS 2871 CZ111 EN CW706RNegotiableMOQ: 1 Piece -
CuZn20Al2As Aluminum Brass Tube , ASME SB395 Copper Nickel Pipe Welding CZ110NegotiableMOQ: 1 Piece
-
CuNi30Mn1Fe Seamless Copper Nickel Heat Exchanger Tube Cu Ni 70 30 C71500 3/4\'\' X 0.065\'\' X 20\'\'NegotiableMOQ: 1
-
Polished Stainless Pipe 240G Sanitary Stainless Tubing 2\'\' X 0.065\'\' X 20\'NegotiableMOQ: 1 Kilogram
-
DIN 11850 Polished Stainless Steel Tubing Hygienic Pipe 28X1.5X6000 MMNegotiableMOQ: 1
Certification:ISO9001:2008, PED 97/23/EC
Heat Treatment Copper Nickel Tube Heat Exchanger piping OD 4.00MM - 76.2MM
General Copper Nickel Tube information:
Cu-Ni alloys are alloys of copper (base metal with the largest individual content) and nickel with or without other elements, whereby the zinc content may not be more than 1%. When other elements are present, nickel has the largest individual content after copper, compared with each other element. As with other copper alloys, it is necessary to distinguish between wrought alloys, which are processed to semi-finished products, and cast alloys, from which castings are produced by various casting processes. The Cu-Ni alloys with additions of manganese are important in electrical engineering. Additions of iron significantly improve the resistance of Cu-Ni alloys to erosion corrosion in flowing seawater and other aggressive waters.
Copper Nickel Tube Corrosion Resistance:Copper alloys have very good resistance to seawater, brine water, organic compounds, salts, diluted non-oxidizing acids, and more. CuNi 90/10 (C70600 & C7060X) is a Copper Nickel Iron alloy with a small content of manganese which allows excellent resistance to sea- and brakish water. Of all commercial coper alloys, CuNi 70/30 (C71500) offers the best resistance to aqueous corrosion. It is resistant to acid solutions and highly resistant to stress corrosion cracking, and impingement corrosion. In addition, CuNi70/30 offers a greater strength for higher pressures.
Copper Nickel Tube Heat Resistance:The hot strength of copper increases with only a small addition of nickel. By adding iron, mechanical properties are improved, not only at room temperature, but also at elevated temperatures. 10% Ni. CuNi10Fe1Mn, for example, can be used in pressure vessel construction up to 300°C, CuNi30Mn1Fe up to 350°C. Above these limit temperatures, strength drops markedly, particularly the creep strength and creep strain limit.
Copper Nickel Tube Heat Treatment:In general, heat treatments are only used with Cu-Ni alloys for soft annealing and stress relieving. Temperatures for recrystallisation annealing can vary over wide limits between about 620 and 900°C, depending on degree of cold work, nickel content and additional constituents. High temperatures are associated with short annealing times (continuous annealing) and low temperatures with long annealing times (static annealing). Stress-relief annealing is carried out at 280 to 500°C. It is advisable to anneal excluding air or in a slightly reducing atmosphere, to avoid the pickling that is required with air-containing annealing atmospheres.
Specifications:
| UNS No. | C70600 – BSI No. CN102 – ISO Name CuNi10Fe1Mn |
| Chemical Comp. (%) | Cu rem / Ni 9 ~ 11 / Pb 0.05 / Fe 1 ~ 1.8 / Zn 1 max / Mg 1 max |
| ASTM Spec. | B 111, B 395, B 466, B 552 |
| ASME Spec. | SB 111, SB 395, SB 466 |
| Applications | Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping. |
| Temper | O61 Annealed / H55 Light-Drawn |
| Properties | Metric | English |
| Density | 8.94 g/cc | 0.323 lb/in³ |
| Tensile Strength min.- O61 -/- H55 | 275 MPa -/- 310 MPa | 40 ksi -/- 45 ksi |
| Yield Strength min.- O61 -/- H55 | 105 MPa -/- 240 MPa | 15 ksi -/- 35 ksi |
| CTE, linear | 17.1 10-6/°C @ 20.0 – 300 °C | 9.5 10-6/°F @ 70.0 – 570 °F |
| Specific Heat Capacity | 0.09 cal/g-°C @ 20ºC | 0.09 BTU/lb-°F @ 70ºF |
| Thermal Conductivity | 45 W/m-K @ 20.0 °C | 26 BTU/ft2/ft/h/°F @ 70.0 °F |
| Melting Point | 1099 – 1149 °C | 2010 – 2100 °F |
Desalination
Seawater Piping Systems
Send Inquiry to This Supplier
You May Also Like
-
Aluminum Alloy Ingot With Facotry PriceUS$ 2,000 - 2,500MOQ: 20 Tons
-
Wholesale Exporter Aluminium Alloy 99.7 % 99.9% Purity ADC 12 Ingot AluminiumUS$ 1500 - 1600MOQ: 5 Metric Tons
-
Manganese Ingots/High Purity/Mg99.99 Mg99.98 Mg99.96 Mg99.95 Mg99.95 Mg99.9US$ 1000 - 3000MOQ: 5 Tons
-
China Manufacturer for 7075 Aluminum Extruded Rod Supplier's ChoiceUS$ 2,900 - 4,500MOQ: 1 Metric Ton
-
Directly Factory Aluminum Ingot 99.7% 99.8% 99.9% 2021US$ 1180 - 2100MOQ: 20 Metric Tons
-
Cheap Aluminum Ingot 99.7%US$ 1360 - 2500MOQ: 1 Metric Ton
-
Magnesium Metal Ingot 99.90%min For Aluminium Alloying CastingNegotiableMOQ: 1 Tonne
-
Aluminum Ingot,aluminum Ingot 99.7%,pure Aluminum Ingot,high Purity Aluminum Ingot,manufacturer of Aluminum IngotUS$ 1760 - 1890MOQ: 25 Tons
-
Titanium Plate,sheet IndustryUS$ 18 - 18MOQ: 50
-
Roofing Embossed Aluminium Sheet Coil 1050 3003 8011 0.32mm - 0.65 mm Continuous CastingNegotiableMOQ: 1
