Sulfur Powder Production Equipment
Sulfur Mill is a air-milling machine with a full-circle closure. Before the mill machine works, the fire-retardant gas (nitrogen) are filled to replace with the air inside. After the access of materials, the fire-retardant gas are supplemented continuously to prvent the burning of the sulfur powder.
The cooling filtration system is adopted in this equipment, so that the temprature can be controled at the rangement of 18 to 22℃. Because the sulfur powder can become soft while being heated, which could affect the output of sulfur. After being cooled ,the sulfur powder can be seperated easily, the function of filtration system is to control the content of sulfur powder in the refluxing air.
Closure air system is adoptted both in feed and output of the machine to prevent air to flow and fire-retardant gas overflow.
Raw materials are transported to raw materials warehouse by conveyor belt, then are put into the mill to crush by closed-air feeder which is at the bottom part of raw materials warehouse. Closed-air feeder can not only prvent the air from entering, but also control the feeder rate.
After the powder is made, the air-closed feeder will sent the powder to the air conveyor. Then the powder is sent into the product storehouse by air conveyor. The powder is packed quantitatively by Automatic Packing Machine which placed at the bottom of the product storehouse. Finally the packed powder is transferred to the storehouse.
The main engine current of electric control cabinet should be paid attention to when adjusting the flow of Automatic Feeder. Working electric current and motor rated current should match, so as to avoid the mill over loaded.
The other point which should be paid attention to is the air inflow of flame retardant (0.2 m3/3 ton). Low content of flame-retardant air will cause to burn.
- Operating procedure
- Starting the main engine.
2. Starting the extention engine.
3. Starting the inflatable system.
4. Starting the cooling filtering system.
5. When feeding, adjust the feeder slowly. Output system should not be manual but automatic.
6. Starting the air conveyor.
power off.
1. Turning off the feeder.
2. Turing off the main engine after five minutes.
3. Turning off the extention engine, inflatable system, cooling filtering system after three minutes.
- Equipnent installation and after sverice.
- For domestic customers, we will send technical engineers to the buyer’s site for installation and debugging machine with free of charge
- As for overseas client, we send techincal engineers to the buyer’s site for installation and debugging machines, expenses abroad should be paid by the buyer. (including around air tickets,hotal,board abroad and not less than 33dollars salary per day for each technical engineer.)
- If foreign customers can install themselves, we can provide the installation drawings.
7. We guarantee quality of the machines for a peried of six months。(exclude easily damageable parts.)
Send Inquiry to This Supplier
You May Also Like
-
Mixing Production LineNegotiableMOQ: 1 Set
-
Mixing TankNegotiableMOQ: 2000 Sets
-
Small Drum Concrete Mixer 4kw 380V, Portable Cement MixerNegotiableMOQ: 1 Combo
-
Complete Small Detergent Liquid Hand Sanitizer Gel Making Processing MachineUS$ 5300.00MOQ: 1 Set
-
GYC Soap Small Making MachineNegotiableMOQ: 1
-
High Quality JHS2000 Big Capacity Powder Mixer for Chemical PowderUS$ 10,000 - 15,000MOQ: 1 Set
-
China Dry Mortar Zenamix Powder Mix Plant, Pigment Powder Mixing Machine for Making DetergentUS$ 800 - 1,500MOQ: 1 Set
-
Oil Drilling Mud Liquid AgitatorNegotiableMOQ: 1 Set
-
Fertilizer Manure Blender MixerUS$ 3,000 - 35,000MOQ: 1 Set
-
Professional Fish Chicken Poultry Feed Mixing Machine, Cattle Feed Mixer Machine, Feed MixerUS$ 1,010 - 2,700MOQ: 1 Set