Contact Platform Support
Help Center35mm White Plastic Injection Molded Products Waterproof for Antenna Fittings
Related Products
-
MT 5 Plastic Injection Molding Products 2 Socket POM Fixing Clamp UL94V-2 20 X 10mmNegotiableMOQ: 1 Set -
Precision Plastic Injection Molding Products Custom Assorted Industrial FastenersNegotiableMOQ: 1 Piece
-
Green 3 Vanes Plastic Propeller Injection Molding 60mm Environmental StandardNegotiableMOQ: 1 Unit
-
Customized Plastic Injection Molding Products 5mm White Plastic U ClampNegotiableMOQ: 1 Kilogram
-
RAL9003 White Plastic Injection Molding Products , Round Base Washer Shim 5 X 50 mmNegotiableMOQ: 1 Piece
Certification:ISO 9001
35mm White Plastic Injection Molded Products Waterproof for Antenna Fittings
High precise white plastic injection molding support part with individual design for communication antenna , it is like “ L “ shape and a round section is placed short end with a threaded hole , a bending wing on each side .Longer bottom to support other pieces and secure them from sockets in side of bottom .
Plastic injection molding support part is made from nylon PA 66 and white color chosen . it is with good performances
Low friction and good self-lubricant for a long service
Wide working temperature from -30℃ to 150℃ for the most areas with different climate .
Material
Plastic injection molded support is manufactured from nylon that is the best application in engineering plastics .
Dimensions
Length : 40 mm
Width : 20 mm
Height : 15 mm
Thread hole : M4
Thickness :3 mm
Note : Customized sizes are welcome , and we are capable of developing complex designs .
Tolerance
Normally , the tolerances for plastic injection molding support is 0.1mm , we refer to ISO 2768-m request for unspecified sizes .
| Basic Sizes | Level | |
| MT7 | ||
| A | B | |
| 0-3 | 0.19 | 0.29 |
| 3-6 | 0.23 | 0.33 |
| 6-10 | 0.28 | 0.38 |
| 10-14 | 0.33 | 0.43 |
| 14-18 | 0.38 | 0.48 |
| 18-24 | 0.43 | 0.53 |
| 24-30 | 0.49 | 0.59 |
| 30-40 | 0.56 | 0.66 |
| 40-50 | 0.66 | 0.76 |
All are in millimeters
Values means “±” tolerances .
Electrical Performance
Electrical performances is helping you to choose suitable material for plastic injection molding parts
| Dielectric constant | 1.63 |
| Arc resistance sec | 130～140 |
| Specific volume resistance Ω·cm | 1.83×1015 |
| dissipation factor | 100～400 |
| Dielectric strength(kV/mm) | 20～30 |
Mechanical Property
| Tensile strength MPa | 60～80 |
| Elongation at break % | 2.2 |
| Bending strength MPa | 100～120 |
| Modulus of elasticity for bending MPa | 2000 ～3000 |
| Notched Impact Strength(J/m) | 60～100 |
| HR hardness | 118 |
Additional materials for plastic injection molding parts
In addition to PA , we provide ABS ,PP , PE ,PMMA and POM etc materials for more plastic injection molding parts , these materials with different features and are used for different conditions , you can make a suitable choice according to your applications .
| Material | Mechanical Property | Chemical Performance | Fire Resistance | Popular Application |
| ABS | Good comprehensive mechanical performances , wear resistant and impact resistance | Corrosion resistance and stable chemical performance | Easy to be burned | Life items , toys ,electronics , sport items and furtures etc |
| PMMA | High mechanical performance and tensile strength , and resistance to impact | Corrosion resistance and stable chemical performance | Easy to be burned | Mainly used to items that request transparency like light housing , wall board . Medical devices etc |
| PS | Usual tensile strneth , hard material , but weak on resistance to impact | Stalbe chemical performance and corrosion resistance | Easy to be burned | Daily ornament , heat insulator for buliding |
| PP | Wear resistant , hard surface and high tensile strnegth , not easy to be broken | stable on chemical performances | Easy to be burned | Various pipes , packages , parts for heat resitance etc . |
| POM | Hard surface , high tensile strength and not easy to be deformed , wear resistance and self lubricant | Resistance to oils but not for acid and alkali and moisture | Easy to be burned | valve , gear . Shaft . Pipes and switch housing etc . |
Differences for plastic materials
Send Inquiry to This Supplier
You May Also Like
-
AutoScan-DS 200 Blu-ray Scanner With Display Hottest Cnc LatheUS$ 2,000 - 8,000MOQ: 1 Set
-
IP68 RFID Portable Scanner for Security Guard Tour PatrollingUS$ 60 - 85MOQ: 1 Set
-
ScannerNegotiableMOQ: 1 Unit
-
USB Cable for Barcode Scanner RJ45 to USB Barcode Cable for ScannerUS$ 1.5 - 2MOQ: 500 Pieces
-
3d Foot Pressure ScannerUS$ 5,000 - 8,900MOQ: 1 Set
-
VAG409 ScannerNegotiableMOQ: 1 Set
-
Remax CNC Router Machine 3D ScannerUS$ 5,873 - 5,900MOQ: 1 Set
-
XT205M2B POS Barcode Scanner Machines Modern QR Code Scanner Barcode Readers ModulableNegotiableMOQ: 1 Piece
-
Adamantine Multi-Function Chip Imaging Scanner for Mobile Phone Motherboard Fault DiagnosisUS$ 2565MOQ: 1 Piece
-
Bar Code ScannerUS$ 1 - 100MOQ: 3 Pieces
