90 90mm Square Bottle Sterilization Machine Adopt Three-Stage Cooling Process

≤ 90 × 90mm Square Bottle Sterilization Machine Adopt Three-Stage Cooling Process

1. Outline:

This machine is absorbing domestic and foreign similar equipment technology new design is made using a three-stage cooling process, the device uses the first paragraph of the product 85 ℃ hot water heat sterilization; second, and the third uses the cooling tower circulating water spray cooling; exit on the bottle using a water rinse to prevent the bottle appears stains.

Device is equipped with automatic water heating device, other automatic chlorination pump, fill water can be adjusted according to the amount of chlorine. Design into the bottle temperature is 85 ℃, the bottle temperature 40 ℃. Cooling temperature parameters: Product Center into the device when the temperature is 85 ℃, the device core temperature below 40 ℃.

 

2. Technical parameters:

Cooling capacity: 12,000 bottles/hour (500ml)

Effective treatment area: 17.8308M2 85 ℃

hot water spray time: 7.3min

cooling tower water spray time: 14.6min

Continuous Water consumption: 15T / h (depending on the local temperature)

bottle height dimensions: 160 ~ 310 (mm)

bottle sizes: round

bottle diameter ≤ Φ96mm, square bottle ≤ 90 × 90mm

chain network speed: 0.5 ~ 3m/min

Main power: AC 3-380V/50HZ

Total power: 12.1Kw

Dimensions: 9000X2100X1800mm

3. Flow diagram:

4. Features:

machine are made ​​of stainless steel (foot, bearings, motors, etc. excluded), you can set the viewing window frame four weeks, the top is designed to be open structure, easy maintenance; cooling tunnel sump with high and low level control alarm and circulating water filtration devices; chain plate heat using standard network chain, board formation, resistance to wear; using direct drive gear motor, Mitsubishi inverter, to ensure smooth and reliable operation; Main motor overload protection device design, can effectively protect the chain plate and drive; equipped with a circulating pump spray