Contact Platform Support
Help Center3.5KW Induction Forging Equipment For Large Workpiece , Digital Control
Related Products
-
Energy Saving Induction Heater For Forging , Induction Heating EquipmentNegotiableMOQ: 1 Piece -
IGBT Induction Hardening Machine For Induction Preheater 1450F , CE ApprovedNegotiableMOQ: 1 Unit
-
35kva Induction Forging Machine For Annealing of Pipe Welding , High SpeedNegotiableMOQ: 1 Piece
-
Multi-functional Induction Forging Machine / Heater For Shrink-fittingNegotiableMOQ: 1 Piece
-
35KHZ High Power Induction Forging Machine For Welding FabricationNegotiableMOQ: 1 Piece
Certification:ISO
3.5KW Induction Forging Equipment For Large Workpiece , Digital Control
Quick Detail:
Type:Other
Place of Origin:China (Mainland)
Brand Name:Canroon
Model Number:CR2000-03.5A-14T
Voltage:230V
Current:16A
Rated Capacity:3.5KW
Rated Duty Cycle:3.5KW
Dimensions:H:300MM W:245MM D:550MM
Weight:12Kg
Usage: Brazing, Stress relieving and preheating,PWHT
Certification:CE ISO9001:2008
After-sales Service Provided:Overseas service center available
Process:Induction heating equipment
Input Power:230V;1-Phase,50HZ
Temperature recorder:2 Channel temperature recorder
Description:
The new induction preheater CR2000 can be used as an air-cooled system for temperatures up to 1450º F . The preheater features multiple outputs, six control thermocouples to ensure uniform heating, significantly faster time to temperature than conventional heating, and an extremely easy-to-use operator interface that allows the operator to program ramp and hold temperature times. It also tutors the operator to achieve maximum output from the induction coils.
Applications:
With the introduction of theInduction Heating Machine, this simple and cost-effective heating process can be applied in the following applications to deliver fast and consistent heat:
Welding fabrication and construction; Preheating of welds; Post-weld heat treatment; Coating removal; Shrink Fit and so onSpecifications:
|
Input Amperes at Rated Output |
230V:16A |
|
Thermal conversion efficiency |
More than 90% |
|
Maximum Rated output |
3.5KW |
|
Cooling Mode |
Air cooled |
|
Input power |
230V,1-phase,50HZ |
|
Rated Output |
3.5KW at 100% duty cycle,1-35KHZ |
|
TC input |
6 circuit |
|
Digital Recorder |
Optional |
|
Control Model |
Digital Control |
|
Resonance |
Series Resonance |
|
Temperature |
Max 1450°F |
|
Dimensions |
H:300MM W:245MM D:550MM |
|
Transportation |
By sea or By Air |
|
Weight |
12KG |
|
Warranty |
12 Months |
Competitive Advantage:
1.Versatile Mobility:optional running gear designed for construction and maintenance
2.On-board temperature control:provide for manual or temperature based programming in a simple-to-learn operator interface
3.Muitiple control thermocouple inputs:available to control on the hottest TC during heating and coolest TC during cooling for
4.uniform heating and quanlity
5.Open output detection:prevents system operation without a covered output receptacle(cable or protective plug)
6.Isolation fault protection:provides automatic system shut down power source output to ground.
7.Low consumable costs:No fuel costs and minimal insulation costs.insulation is resuable and may be used 50 time or more,reducing costs of disposal and replacement.
8.Uniform heating:maintained along and through the heat zone by using induction to heat within the material.the surface of the part is nor marred by localized conducted heat at higher than specified temperatutes.
9.Time-to-temperature:faster than conventional processes due to methed of applying the heat,reducing the heating heating recyle time.
10.Improved working environment: With welding,welders are not exposed to open flame,explosive gases and hot elements associated with fuel gas heating and resistance heating.
11.High energy-efficeent systems:(more than 90 percent efficient)transfers more energy to the part,decreassing heating times and impoving power efficietnt.
12.Easy Set-up:achieved using
Send Inquiry to This Supplier
You May Also Like
-
Custom Led Light Housing Aluminum Lamp ShadeNegotiableMOQ: 1
-
Custom Spun Aluminum Metal Lamp ShadesUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Industrial Lighting IP65 LED Tunnel Light Lamp CoverUS$ 48 - 50MOQ: 100 Sets
-
Plastic Flower Pot, Outdoor Flower Pots, Plastic Furniture, Roto Mold Flower PotUS$ 20 - 50MOQ: 100 Units
-
Bamboo Lamp Shader With Glass Candle HolderUS$ 0.8 - 6MOQ: 300 Pieces
-
High Quality 8" Cool Tube With Full WingUS$ 30 - 60MOQ: 300 Pieces
-
High Quality Customized Street Lamp Post in ChinaUS$ 0.5 - 3MOQ: 100 Pieces
-
White Fluorescent Shade Precision Made by Cixi BangheUS$ 2.5 - 4.5MOQ: 200 Pieces
-
Top Quality Aluminium Led Profile Cnc Machined Aluminium Led ProfileUS$ 0.1 - 10MOQ: 100 Pieces
-
DDS-L013 Trade Assurance Large Clear Acrylic DomeUS$ 1 - 3.49MOQ: 500 Pieces
