Contact Platform Support
Help CenterANSI DN80 PN110 Steel Pipe Flange , Stainless Steel Threaded Flanges
Related Products
-
Class 300 Carbon Steel Pipe Flanges , Raised Face Weld Neck Flange ASTM A105NegotiableMOQ: 1 -
ASME A105 Carbon Steel Tube Sheet Steel Pipe Flange For Heat ExchangerNegotiableMOQ: 1 Piece
-
BL / RF 3/4\'\' ASME B16.5 Stainless Steel Blind Flange Steel Pipe FlangeNegotiableMOQ: 1 Square Meter
-
ANSI B16.5 Weld On Flanges Pressure Vessel Flange Connection For PipesNegotiableMOQ: 1 Set
-
Heat Exchanger Steel Pipe Flange Customized Made Flat Face Flanges For GasNegotiableMOQ: 1 Set
Certification:MTC/COC/ISO
ANSI DN80 PN110 Steel Pipe Flange , Stainless Steel Threaded Flanges
GERNERAL INFORMATION ABOUT FLANGE
Size range: 1/2\" to 80\" DN10 to DN2000
Design: welding neck, slip on, blind, socket welding, threaded, lap-joint
Pressure: PN2.5,PN6,PN10,PN16,PN25,PN40, class150, class300, class600, class900, class1500, class2500.
Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS
Material: carbon steel , stainless steel ,alloy steel
Coating: black paint, yellow transparent paint, cold and hot dip galvanized
| Size |
1/2\"-80\" |
| Type |
Weld Neck, Slip-On, Blind, Socket Weld, Lap Joint, Threaded, Orifice Flange, Swivel Flange, Spectacle Blind,Etc. |
| Standard |
ANSI, ASME ,MSS, API, DIN, JIS, BS. AWWA and GB |
| Pressure |
ANSI 150LBS-2500LBS, |
|
DIN PN6-PN100 |
|
|
BS PN0.25-PN25 PN2.0-PN42.0 |
|
|
ISO7005-1,PN2.5-PN40 |
|
| Materials |
ASTM:SA105N/A105 |
|
Low Temperature Carbon Steel: ASTM SA350 LF2 |
|
|
High Strength Steel: ASTM SA694 F42/46/52/56/60/65 |
|
| ASTM A182 F304/304L/316/316L | |
| ASTM A182 F1/F5/F9/F11/F22/F91/Etc. | |
| ASTM A182 F51/F53/F55/F60 | |
| Nickel 200, Monel 400, Inconel 600/625, Incoloy 825/800 | |
| 90/10,70/30 |
Materials shall be identified in the following ways:
(a) Cast flanges shall bemarkedwith theASTMspeci-fication, 1 grade identification symbol (letters and num-bers), and the melt number or melt identification.
(b) Plate flanges and forged flanges shall be marked with the ASTM specification 1 number and grade identi-fication symbol.
(c) Amanufacturermay supplement thesemandatory material markings with his trade designation for the material grade, but confusion of symbols shall be avoided.
(d) For flanges manufactured from material that meets the requirements for more than one specification or gradeof a specification listed inTable 1, seepara. 4.2.8.
Advantage description:
PROVIDING ASME / EN / JIS / GB CODE & NON CODE INDUSTRIAL FLANGES FOR:
The Petrochemical, Process, and Waterworks industries. ANSI, API, AWWA pipe flanges in carbon steel , stainless steel , alloys and chrome steel. Weld Neck, Slip on, Blind, Threaded, Socket Weld, Lap Joint, Orifice Flanges, Ring, and custom flanges in sizes 1/2\" to 203\". Pressure classes - 75, 125, 150, 175, 250, 300, 350, 400, 600, 900, 1500, 2500, 5K, 10K, 15K, 20K. High Yield - Low Temp.
Send Inquiry to This Supplier
You May Also Like
-
Adhesive Magnetic Tape Customized Rubber Magnetic StripNegotiableMOQ: 1
-
Stick Ball Sheet Magnet With Screw HoleUS$ 1 - 1.4MOQ: 1000 Pieces
-
18 mm Hidden Magnet Disc for BagUS$ 0.5 - 2MOQ: 3000 Pieces
-
Neodymium Magnet With Hook, POTN08-25NegotiableMOQ: 1000 Sets
-
Alnico Teaching Magnet Teaching Magnet/educational Magnets/alnico MagnetNegotiableMOQ: 1000 Sets
-
Widely Used Magnetic Separator for Iron OreUS$ 1 - 8,000MOQ: 1 Set
-
Steel Plate Permanent Portable Magnetic LifterUS$ 1 - 9MOQ: 1 Unit
-
Powerful Neodyium Permanent MagneticUS$ 0.001 - 0.1MOQ: 100 Pieces
-
Permanent MagnetsNegotiableMOQ: 1
-
Surface Gauges Magnetic V-blocksNegotiableMOQ: 1 Piece
