Contact Platform Support
Help CenterPP Hot Runner Plastic Injection Mould For Custom Phone Case
Related Products
-
Printer Accessories Plastic Hot Runner Injection Mold ABS PCNegotiableMOQ: 1 -
ABS PC Plastic Injection Mould Computer Accessories HASCO BaseNegotiableMOQ: 1 Set
-
Two Plate Plastic Injection Mold / ABS PC Hot Runner SystemNegotiableMOQ: 1 Piece
-
Pipe Fitting Plastic Injection Mould PP , DME Base Cold RunnerNegotiableMOQ: 1 Kilogram
-
Custom DME Base Plastic Injection Mould For Medical InstrumentsNegotiableMOQ: 1
Certification:ISO9001: 2008
PP Hot Runner Plastic Injection Mould For Custom Phone Case
Quick Detail:
1. The part name: Phone case (plastic injection mold)
2. Plastic material: PP
3. Cavity material: S136 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Hot runner to sub-gate according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers\' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Phone case
mold type: Plastic Injection Mould with hot runner system
Part Material: PC
Locating ring Dimension: Ф3.99\",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2\"
Ejection type: Stripper Plate
Mold construction description: Hot runner system, slider, and 2 plates
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Because using Hot Runner system, the mold will have the key advantages showed below:
1. Elimination of the Runner
2. Cycle Time Reduction/Lower Processing Costs
3. Improved Molding System Efficiency
4. Optimal Part Quality
5. Molding Automation
6. Design Flexibility, where flexibility in gate location can help optimize cavity orientation, cooling and mold simplification.
7. Balanced Melt Flow
Specifications:
|
|
Phone case (plastic injection mold) |
|
2.Plastic material |
PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C |
|
4.cavity material |
S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
Hot runner |
|
8.gate type |
Hot runner to sub-gate according to our customers requires. |
|
9.mould weight |
210 kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers\' requirements |
|
11.cycle time |
15second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
|
software |
Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc. |
|
14. File Formats |
Send Inquiry to This Supplier
You May Also Like
-
Wholesale Aluminum Snow Shovel Head Replacement Metal Blade for Packed Snow Ice Removal, Durable OEM ManufacturerUS$ 3.15 - 3.80MOQ: 1200 Pieces
-
Tree Planting Machine Post Hole DiggerUS$ 500 - 1,000MOQ: 1 Set
-
TLS-02 Outdoor Camping Shovel Mini Multifunctional Survival ShovelUS$ 1.9 - 2.9MOQ: 100 Pieces
-
Shovel With HoleUS$ 1 - 200MOQ: 10 Pieces
-
Car Plastic Snow ShovelUS$ 0.8 - 1.1MOQ: 1000 Pieces
-
Plastic Snow ShovelUS$ 1 - 3.9MOQ: 5000 Sets
-
Snow Shovel Set,gardon Tools ,plastic ShovelNegotiableMOQ: 2000 Sets
-
Snow Shovels Convenience High QualityUS$ 13 - 20MOQ: 1000 Pieces
-
SD0194 Hot Selling Colorful Bottle Pure Color Eco-FriendlyUS$ 0.54 - 1MOQ: 3000 Pieces
-
Non-Sparking Brass Round Point Shovel ,Explosion-proof Aluminum Bronze SpadeUS$ 9.04 - 11.56MOQ: 1 Unit
