Hypertherm Max 200 Consumables / Hypertherm Retaining Cap 220935

Hypertherm Plasma Consumables Retaining Cap 220935 For Hypertherm MaxPRO200 Machine

Our company produces :Hypertherm plasma machine MaxPro200, HyPro2000, Max200, HT2000 plasma consumables. Hypertherm plasma MaxPro200 plasma cutter consumables. Hypertherm Max200 plasma torch consumables, 200A hyperherm nozzle 420044, 220831 130A hyperherm nozzle 220892, 130A oxygen / air hyperherm nozzle 220893, hyperherm electrode 220937, hyperherm shield 420045, hyperherm swirl ring 2200448, swirl ring 220529 

Technical Support:

The maintenance of the plasma torch

1. to correctly install the torch

Correctly and carefully install the torch, and to ensure that all the parts fit together well, and ensures the cutting gas and shielding gas flow, before the installation will be all the components on a clean cloth, avoid dirt adhesion to components. In the "O" type ring with a little lubricant, "O" - shaped ring is appropriate, should not be more.

2. the wearing parts should be replaced in time before the complete damage.

Vulnerable parts are not used completely damaged after the replacement of, because of serious damage to the electrode, the nozzle and the eddy current ring will can not control the plasma arc, cutting torch damage easily. So for the first time found that the quality of cutting down, it should be timely inspection and replacement of wearing parts.

3. The connecting thread cleaning torch

In the replacement of wearing parts or daily maintenance inspection, must ensure that the torch of internal and external thread cleaning. If necessary, apply more than 98% of industrial alcohol cleaning or repair connection thread.

4 the contact surface of the cleaning electrode and the nozzle

Must ensure that the nozzle and electrode contact surface clean and free of oil, if the contact surface with dirt, the torch will not be able to normal working, should use such as hydrogen peroxide cleaning agent cleaning.