Imitation Leather Upholstery Fabric For Cars , Automotive Upholstery Fabric

Name of Product

imitation auto leather 

Composition                                                                                 

30% real leather+40%PU coating+15%cotton+15%polyester

Texture of surface leather

Printing and Embossing

Width

1.37meters /  54inches

Thickness

1.0-1.2mm

Weight

500-800g/m2

Surface color

grey beige steel etc

Backing color

Common color: Natural color ,black,light brown,coffee

Abrasion resistance

At least 250,000 Martindales

Tensile strength

Weft: >70lbf/3cm  Longitude: > 80lbf/3cm

Tearing strength

Weft: >10lbf/3cm  Longitude: >12lbf/3cm

Peeling strength

Weft: >3kg/3cm   Longitude: > 3kg/3cm

Test

Method

Requirement

Results

Pass/Fail

Azo dyetuffs
(Arylamines)

BLC7C.1based on
BS EN ISO
17234-1:2010

Not detectable
(detection limit:30mg/kg)

None detected
(<30mg/kg)

Pass

Chromium VI,soluble

BS EN ISO
17075:2007

Not detectable
(detection limit:3.0mg/kg)

None detected
(<3.0mg/kg)

Pass

Formaldehyde

BLC 7A.9 based on
BS EN ISO
17226-1:2008

General <75mg/kg

54mg/kg

Pass

Chlorinated phenols
PCP,TCP&TeCP

BLC 7B.5 based on
BS EN ISO
17070:2006

Not detectable
(detection limit:1.0mg/kg)

None detected
(1.0mg/kg)

Pass

PH

BS EN ISO 4045:2008

Min.3.2.if the pH value is below 4 or above 10,the diff.figure shall be <0.7

PH=6.19

Pass

Extractable heavy metals screening

BS EN 71-3:1995
Migration of elements

Pass as specified in
BS EN 71-3:1995

See separate
table for indivi
-ual result

Pass

Dimethyl fumarate
(DMF)

BLC 7A.6
GC-MS analysis

None Detectable
<0.1mg/kg

None detected
(0.1mg/kg)

Pass