Contact Platform Support
Help CenterOEM Oil Circulation System Mold Temperature Control Unit Equipment for Bottle Blowing Machine
Related Products
-
High Temperature Oil Circulation System Mold Temperature Control Unit 300 Used for Pasta Machine /NegotiableMOQ: 1 Piece -
High Temperature Mold Temperature Control Unit for Injection Machine / Bathroom Equipment / Paper MaNegotiableMOQ: 1 Unit
-
300 Full Auto Mold Temperature Control Unit Applied to Ironing Machine / Chemical Fiber MachineryNegotiableMOQ: 1 Unit
-
OEM Industrial Oil Heating Mold Plastic Temperature Controller Mold Temperature Control Unit EquipedNegotiableMOQ: 1 Piece
-
Hot Runner Mold RHAM Oil Circulation System Mold Temperature Control Unit Equiped With Blister MachiNegotiableMOQ: 1 Piece
Certification:CE & ISO9001:2000
AEOT-40-40 Mold Temperature Control Units(MTC) are used to preheat a process to the desired operating temperature by engaging the unit\'s electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control. AEOT series MTC offer the range of temperature control from 25°C to 300 °C.
SAFETY PROTECTIONS:
No-fuse breaker for the overcurrent phenomenon of general power supply. Motor reversion protection and indicator light up. Cooling water lacking protection and indicator light up. Circulating pump overload protection and indicator light up. BY-PASS pressure release loop for hot oil. Phase failure protection. High-voltage explosion-proof device. Anomaly explosion-proof buzzer. Prevent dry combustion device, discharge scale deposit protection. No-voltage exhaust protection system.SPECIFICATION DETAILS:
|
No. |
Part |
Specification |
Data |
|
1 |
model |
AEOT-40-40 |
|
|
2 |
power supply |
3N-380-50HZ |
|
|
3 |
Hot medium |
oil |
|
|
4 |
control mode |
PC board Self - optimized microprocessor |
|
|
5 |
accuracy of temp. control |
PID±1℃ |
|
|
6 |
Max. temperature |
300℃ |
|
|
7 |
Min. temperature |
25℃ |
|
|
8 |
heating power |
40KW(adjustable) |
|
|
9 |
heat exchange area |
0.1M2 |
|
|
10 |
Pump |
model |
SAP50-32-160 |
|
power |
3KW |
||
|
lift |
30M |
||
|
flow |
12.5M3/hr |
||
|
11 |
heating method |
Direct heating(Indirect cooling) |
|
|
12 |
Pipeline |
hot medium inlet/outlet |
DN32(adjustable) |
|
cooling water inlet/outlet |
DN15(adjustable) |
||
|
drain oil port |
DN15(adjustable) |
||
|
13 |
Temp. Controller |
model |
P6100(WEST) |
|
modulating action |
Dual PID control of heating & cooling |
||
|
Temp. interaction stick |
K- thermocouple |
||
|
display status |
Respectively display set point & real point |
||
|
output select |
SSR output |
||
|
14 |
Expansion Tank |
volume(L) |
6 |
Send Inquiry to This Supplier
You May Also Like
-
Fuel Engine Manual Start Rewind Starter Disc for Cable Drive Equipment – Compatible With Cable Feeders, Pulling & Laying MachinesUS$ 20 - 50MOQ: 1 Combo
-
Generator Set PartsNegotiableMOQ: 2000 Pieces
-
MOCAP in Stock Outside Pull Tapered Protective Plastic Plugs and CapsUS$ 0.02 - 0.03MOQ: 3000 Pieces
-
C27 Generator Industrial Diesel Engine Exhaust Muffler 295-8200 CA2958200 2958200NegotiableMOQ: 1
-
4902904 Actuator for Cummin s Diesel EngineNegotiableMOQ: 1
-
Truck Fuel Spin-on 20976003US$ 2.9 - 11.9MOQ: 200 Pieces
-
Black Coated Dynamo Bracket for Sale Custom Made for Mid East CountriesUS$ 75 - 110MOQ: 100 Sets
-
Leaf Spring for Steam Seal Ring of GeneratorUS$ 8.9 - 9.2MOQ: 50 Pieces
-
United Power Generator PartsUS$ 3 - 6MOQ: 1000 Pieces
-
Best Price Stable Enamel Ozone Generator Spare PartsUS$ 200 - 700MOQ: 1 Piece
