Environment Friendly Industrial Drying Equipment , Exhaust Flow 10000 Nm/h

Comprehensive Utilization of Waste Heat Environment Friendly Industrial Drying Equipment

System Introduction :

At present, the direct emission of high temperature flue gas, steam occurs in lots of printing and dyeing

factories, power plants, which is a great waste of thermal energy. At the same time, there is a need for

the drying of sewage sludge or other materials, which will consume a lot of fuel to supply heat. It will

have great significance to reduce the environmental pollution and to alleviate economic pressure of

enterprises by making effective use of the waste heat to dry the wet materials. Different factories are

with different tail gas temperature, most of them is between 120℃ and 500℃.

Process Flow :

The scheme for maximizing the utilization of system thermal energy can be designed as per different

material, waste heat temperature and waste heat flow.

Case: 4T/D Sludge Processing Project for one of Shanghai dyeing factories, exhaust flow: 10000Nm³/h,

exhaust temperature:180℃; Our design is to use Φ2 x 5m intermittent dryer, which has been put into

production.

System Advantages :

1. Waste heat utilization, energy saving and environmental protection;

2. No fuel consumption, few power consumption, the original dust removal system can be used to save

investment;

3. Obtain raw material locally, additional land is not required;

4. High level of automation, laborsaving;

5. Drying time can be adjusted, and the water content can be controlled after drying.

6. By making use of waste to produce useful product, such as fuel, concrete aggregate. That is to say,

it is environmental friendly.