Contact Platform Support
Help CenterYG8 Tungsten Carbide Round Bar / Ground Finished Tungsten Carbide Rod Wear Parts
Related Products
-
YG8C Tungsten Carbide Bars / Plates Blanks / Finished for Wear ResistUS$ 4 - 5MOQ: 1 Piece -
Customized Mechanical Tungsten Carbide Wear Parts Seal Rings for Oil and Gas IndustryUS$ 4 - 5MOQ: 1 Set
-
YG6X Tungsten Carbide Wear Parts Nozzles for Sandblasting / Spraying / Water JetUS$ 4 - 5MOQ: 1 Set
-
YG8X Tungsten Carbide Wear Parts Nozzle Covers for Oil Drilling Bit / Sand BlastUS$ 4 - 5MOQ: 1
-
K20 K30 Tungsten Carbide Wear Parts Carbide Dies Cold Forging / Wire DrawingUS$ 4 - 5MOQ: 1 Set
Certification:CE,FCC,MSDS
YG8 Tungsten Carbide Wear Parts Solid Rods Ground Finished for Wear Resistance
Tungsten carbide rods are mostly applied for end mill and drill with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with Sub-micron grain grade YG6X, and for fibreglass reinforced plastics, titanium alloys, hardened steel with Ultra-fine grain grade YG8X, ect.
Brief Introduction of Carbide Solid Rods:
Standard Available: GB, ANSI etc.
Recommended Grade for tungsten carbide rod: YG6, YG8, YG6X, YG012, YG013, YG8A etc
Tungsten carbide rod applications include drill bits, end mills, and reamers. Custom diameters and length are also available in these grades as well as metric sizes
Spcecification: φ3--30mm Length: 330mm
Advantages of Tungsten Carbide Rods:
100% raw material.
Size standard as per your requirements
Professional suggestion on products
Fully adopted in advance technology and equipment
Professional manufacture for tungsten carbide items
Fully adopted in advance technology and equipment
Quality Control System and strict inspection
Dimensions and Tolerance of Standard Carbide Rods Blanks:
|
Dimension & Tolerance |
||||
|
D diameter (mm) |
L1 Length〔mm〕 |
L2 Length〔mm〕 |
D Diameter Tolerance |
L Length Tolerance |
|
Dia. 1mm – 4mm |
310 |
330 |
+0.15 ~ +0.60 |
+0.00 ~ +10.00 |
|
Dia. 5mm – 10mm |
+0.20 ~ +0.70 |
|||
|
Dia. 11mm- 35mm |
+0.25 ~ +0.80 |
|
D Diameter 〔mm〕 |
D Diameter Tolerance 〔mm〕 |
L Length 〔mm〕 |
L Length Tolerance〔mm〕 |
|
D<3 |
+0.15 ~ +0.60 |
L<50 |
+0.00 ~ +3.00 |
|
50≤L<100 |
+0.00 ~ +3.50 |
||
|
3≤D<10 |
+0.20 ~ +0.70 |
100≤L<200 |
+0.00 ~ +(L×3%) |
|
D≥10 |
+0.25 ~ +0.80 |
L≥200 |
Carbide Rods Material Grades:
|
Grade |
Applications |
|
YG6 |
Good hardness and normal strength, for drawing of steel and non-ferrous metal and alloy bars or tubes under the condition of higher Stress. |
|
YG6X |
High wear resistance and high hardness,for drawing of steel wires and non-ferrous metal wires or alloy bars under low-stress condition. |
|
YG8 |
High wear resistance and high hardness,for drawing and straightening steels,non-ferrous metal and alloy bars and tubes; And for fabricating of machine parts,tools and wear parts,such as nozzles,centres,guiding devices,upsetting dies and perforating tools. |
|
YG8X |
Good strength and impact toughness; suitable for plates,bars,saws,seal rings,tubes etc. And it is one of the most popular grade for wear parts. |
|
YG15 |
High Strength and impact toughness, but lower hardness and wear resistance.For drawing steel rools and pipes under high stress condition;And also for upsetting dies and perforating tools under higher impact loading. |
|
YG20 |
Used as wear parts,sheets and some mechanical components. |
|
ZK10UF |
Fine-grained alloy, good wear resistance and high strength.It is one of the most popular grade for rods,bars,tubes and other wear parts, which need high wear resistance and good cautery resistance and low impact toughness. |
|
ZK30UF |
Fine grain grade. Excellent wear resistance, high in strength and impact resistance. Suitable for rough machining of cast iron,non-ferrous metals,nonmetallic materials and heavy cutting. |
|
YG6N |
Good wear resistance and cautery resistance, high strength and |
Send Inquiry to This Supplier
You May Also Like
-
Light Weight Industrial Air BlowerUS$ 1 - 100000MOQ: 1 Piece
-
BOER-GL 50xL DC Cross Flow Fan /micro Blower Fan 12v Axial Cooling FanNegotiableMOQ: 1
-
2014 Bench Top Ionzing Air Blower Professional ManufacturerUS$ 100 - 120MOQ: 1 Set
-
Rotomolded Air Blower Blower Fan,power ToolsUS$ 20 - 200MOQ: 1 Set
-
Hydroponic Grow Systems Inline FanUS$ 20 - 40MOQ: 500 Pieces
-
High Quality 400W 16000r/min Electric BlowerNegotiableMOQ: 5 Pieces
-
Knapsack Blower EB650 High Quality TypeNegotiableMOQ: 1 Set
-
Backward Curved ImpellerUS$ 2.07 - 5MOQ: 1000 Pieces
-
Residential Use Heat Recovery Ventilation in Competitive PriceUS$ 200 - 2,000MOQ: 1 Set
-
Muiti-Tool Systems / Multi - Task Tools / Kombi SystemNegotiableMOQ: 100 Pieces
