Widely Use Aluminum Foil Fiberglass Cloth for Heat Pipe and Duct

Widely use aluminum foil fiberglass cloth for heat pipe and duct

1,temperature: 550 degree
2.width:1m,1.2m,1.5m or as your request
3.length:100m/roll ,200m/roll or as your request

4,Adhesive Type: Hydrogel/acrylate adhesive

5,MOQ:5000m2

Adhesive: high performance synthetic rubber-resin adhesive.

Liner: easy-release silicone release paper.  

FEAUTURES:

-Aluminum backing provides excellent reflection of both heat and light.

-High quality adhesive with super strong adhesion and holding power offers reliable and durable

-Low moisture vapor transmission rate.

-Service Temperature range from -20 to +80ºC (-4 to +176ºF).fireproof material  

heat pipe

TYPICAL APPLICATIONS:

1. Used as the export equipment packing materials for moisture barrier, water-proof, fire-retarding and anti-corrosion.

2.  Processed to all kinds of fire-retarding products such as fire-proof packet, fire-proof suit, fire-proof bag, and fire-proof gloves etc.

3.  Used as the thermal insulation material on Roof,wall,floor,tank,vessel,air conditioner,tank,heat supply pipes or construction materials for the purpose of fire-retarding, anti-corrosion, heat protection and sound aborption.

4.  Packing chemical equipments such as oil and steam transportation pipeline.

PRODUCT FORM & SIZE AVAILABLE:

Roll Wide: 50mm/60mm/70mm/80mm/90mm/100mm/1.0m/1.2m or as customer request 

Roll Length: 50m/100m/200m or as customer request                

heat pipe

SURFACE PREPARATION:

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.  

PRODUCT USE:

It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user's method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10 ~ +40ºC (+50 ~ +105ºF).
heat pipe