Mesh belt dryer FUYU manufacture

Mesh belt dryer

1. 1.     Productintroduction:

Thenet belt drying machine is a kind of drying equipment, which is made byelectric heating, steam heating, hot air heating, batch and continuousproduction.

Meshbelt drying machine is mainly to suppress the finished ball through theconveyor delivered directly to the plate transmission machine, through theupper end of the plate conveyor scraper of the of the finished ball uniform inthe dryer and permeability increase ball to drying effect.

Dryingtime is generally 20-30 minutes, high temperature drying furnace is made ofheat resistant steel chain conveyor and high temperature tunnel kiln. Conveyorbelt with high temperature resistant metal mesh belt, the ball in the net with25-30 minutes after the drying by the cooling network with output.

Meshbelt type drying machine is commonly used for continuously drying equipment,widely used in, building materials, electronics and other industries,especially for the air better sheet, strip, the granulated material drying, ofcake paste material, but also through the granulator or a squeeze mechanismforming after drying.

1. 2.     Workingprinciple:

Meshbelt type drying machine main principle is the material evenly tiled on themesh belt, is driven by the drive device in the dryer moving back and forth,hot air in materials and the cross flow, water vapor from wet discharging holein discharge, so as to achieve the purpose of drying. Network with 12-60 towire mesh belt, the body length by a combination of standard section, in orderto save space, the drying mechanism into multi-layer, common has two room threeand two room five layer, length 6-40m, effective width 0.6-3.0m.

Materialhas the nose to enter slowly through the drying for drying, net belt line speeddepending on the type of material and water content. Air flow to the use ofnegative pressure, porous air, to ensure the effective drying area, wind speeddistribution uniformity, improve the drying effect. In order to get the bestdrying effect and the appropriate output, the water content of the material,the line speed of the net belt, the air volume and the air temperature must beappropriate, reasonable and organic combination.