VIBRATION METER VM-6310

Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
Is pecifically designed for present measuring various mechanical vibration. So as to provde the data for the quality control, run time and equipment upkeep.
Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.
It has the function of testing axle bearing situation.
Model: VM6310
Specifications: Velocity 0.1-200mm/s( 10Hz to 1KHz ) 
Accuracy:<5﹪
Auto power off
Max hold
Operating conditions:0-+40℃(32℉-104℉),≤90%RH
Power supply:4x1.5V  AA(UM-3)battery
Battery indicator: low battery indicator
Dimensions : 160x68x32mm
weight: 181g(not including battery)

KEY WORDS:measuring instrument,electronic meter,high-accuary gauge,electronic tester,didgtial thickness tester,portable vibration tester,guangzhou landtek,vibration Meter

SHORE HARDNESS TESTER  HT-6510F
Durometer Type F is an exclusive design for testing soft cellular materials. The large diameter presser foot and cylindrical indentor configuration allow measurement by direct application to the test specimen.
 SPECIFICATIONS
Display:4 digits, 10 mm LCD
Range:0~100
Resolution:  0.1
   Presser foot: 80mm diameter
 Indenter: Extension 2.54mm
                   25.2mm Cylinder
 Spring force: 455gf
Measurement deviation: ≤ ±1
        Power supply: 4x1.5v AA (UM-3) battery
        Operating condition: Temp. 0~50℃
                                           Humidity <80%      
        Size:162x65x28mm (6.4x2.6x1.1inch)
        Weight:about  490g
                               (not including batteries)
          PC interface: RS232C interface
        Power off :  2 modes
               Manual off at any time by depressing the power key till OFF shows on the display or Auto power off after 2 minutes from last key operation .     
        Accessories:
      Carrying case  1 pc.
       Operation manual   1 pc.