IP20 DMX Multicolor Home LED Strip With Silicon Tube 475nm LED Wavelengths

IP20 DMX multicolor home LED Strip With Silicon Tube 475nm​ LED wavelengths

Datesheet 

Description  

1.You may know WS2811 LED strip , but in this strip we call it WS2812B led strip , as it is the WS2811 IC chip inserted in 5050 RGB 4 pin LED diodes. the chip only uses a single pin for input and a single pin for output , that means only Date pin for signal transfer , no clock pin using  .

2. These LED strips are even more fun and glowy. There are 30 RGB LEDs per meter, and you can control each LED individually!  this is the digitally-addressable type of LED strip. You can set the color of each LED\'s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). 

3. The strip is made of flexible PCB material,  You can cut this stuff pretty easily with wire cutters, there are cut-lines every 3.33 cm (1 LED each).  Of course, you can also connect strips together to make them longer (Please dont over 5meter length/ 150leds , as there exsit big voltage drop once longer than 5meters  ) 

4. They come in 5 meter reels with a 3-pin JST SM connector on each end and separated power/ground wires for wattage inputting . Of course , customized strip length is workable 

5. You wanted less noticable strip color - this strip has white-colored and black-colored flex PCB, which will be less visible against white-painted or black-painted walls.  

6. You can controlled by Arduino Uno/Mega microcontroller , DMX controller (Madrix Software) , SD controller (LEDEdit Software) and etc 
 

Technical specs

1. 12.5mm wide, 4mm thick with silicon tube casing on waterproof, 33.3mm long per segment

2. 30 LEDs per meter

3. Maximum 5V @ 60mA draw per 33.3mm strip segment (all LEDs on full brightness)

4. 5VDC power requirement (do not exceed 6VDC) - no polarity protection

5. 1 integrated RGB LEDs per segment, individually controllable

6. LED wavelengths: 630nm/530nm/475nm

7. Connector: 3-pin JST SM

8. We currently produce this product with the WS2812B 4-pin chip LED installed. Some company versions may have come with the WS2812S 6-pin LED. Both B and S LEDs can be chained together. The \'B chip type adds additional polarity protection and is the same brightness as the \'S type.   

FAQs

1. How is SHIJI / Ipixel LED ? 

a. SHIJI / Ipixel LED is a manufacturer who focus on full color LED pixel lights and have 5 years experience in pixel led market .

b.Sales department over 12 people , and most customers come from Europe , North America and Mexico .

2. What\'s the certificates do you have ? 

100% items have the CE ,RoHS certificates .

3. Can you provide the ODM or OEM service ? 

Yes , we had rich experience in OEM or ODM service based on customer\'s different requirments