Temperature regulator

Temperature regulator Feature 1. using friendly designing operation method is easy to study and understand 2. containing all functions of international similar measuring appliances, durable and technology mature reliable 3. supplying several models, no matter function is better or cheaper, can also obtain the satisfying selection 4. the input uses the figure adjustment system, built-in commonly used thermo-element and thermal resistance gamma correction form, survey precise stable 5. using the advanced modular structure, providing the rich output specification, can satisfy the widely needs of each kind of application situation, the quick service cuts the maintenance to be convenient technical and parameter 1. RTD: Cu50,Pt100 2. TC: K, S, R, T, E, HJ, B, N, WRe3-WRe25, WRe5-WRe26 3. linear voltage: 0-5V, 1-5V, 0-1V, 0-100mV, 0-20mV; When install modular on MIO or sub-voltage resistance, it could be 0-10Mv 4. linear ampere: install sub-ampere resistance or I4 modular, 0-20mA, 4-20mA 5. linear resistance: 0-80Ω, 0-400Ω, 6. relay contact sensor output (normally open + normally close): 250VAC/ 1A or 250VAC/ 8A 7. SCR without contact sensor output (normally open / normally close) : 100-240VAC/ 0.2A (continued), 2A (20mS instantaneous, re-cycle >5s) 8. SSR output : 12VDC/ 30mA (usage for driving SSR) 9. SCR trigger output : trigging 5-500A double SCR, 2 single SCR anti-parellel or SCR frequency modular 10. linear ampere output : 0-10mA/ 4-20mA could be definition ( insatll X modular, output voltage≥10.5V; X4 modular, output voltage ≥7V measurement accuracy: 0.2%FS ±0.1°c 11. response frequency : ≤0.3s ( setting number filter coefficients sc=0) 12. anti-interference: IEC61000 -4-4 ( electric change to pulse burst quickly), 3KV/ 5KHz; between isolated low electric signal≥600VDC 14. adjustment way: 1.bit type adjustment (could adjust backlash) ; 2.human intelligent adjust, including fuzzy logical PID adjustment and parameter automatic controlling etc advance controlling ways 15. measurement range : K(-100 TO 1300degrees), S(0 to 1700degrees), R(0 to 1700 degrees), T(-200 to +390 degrees), E(0 to 1000 degrees), J(0 TO 1200degrees), B(600 to 1800 degrees), N( 0 to 1300 degrees), WRe3-WRe25(0 to 2300 degrees), WRe5-WRe26(0-2300 degrees), Cu (-50 to +150 degrees), Pt100(-200 to +800 degrees); linear input: -9990 to +30000 degrees to be definition by customer 16. resolution : 0.1°c (when the measuring temperature is more than 999.9 °c , it is changing to 1°c, displaying), could be elect 1°c displaying 17. power supply: 90-260VAC, 50-60Hz; 24VDC/AC, -15%, +10% 18. working environment: temperature-10 to 60 degrees; humidity≤90%RH 19. displaying mode : 7 segment LED displaying, processing value pv: red; setting value sv: green