High Speed Galvanometer Jeans Laser Engraving Machine for Denim 500W / 275W

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Galvanometer Laser Engraving Machine for Denim, High Speed Laser System for Jeans

Features of Laser Engraving Machine for Denim

1.   This laser system is specially designed for Denim Jeans engraving, successfully replaced traditional processing.

2.   Laser engraving is energy-saving, eco-friendly, no pollution and strong personalized.

3.   It can engrave a variety of personalized designs such as cat whiskers, Monkey wash, PP spray, hanging rub, ripped, sandblasting, snow wash, portrait and other effects with clear texture and never fade.

4.   Multi-station circulating conveyor. While in the process, at the same time it also can load material with high productivity.

5.  This machine is equipped with 500W CO2 RF laser and triaxial dynamic large-format Galvo system. Low maintenance cost. Fully closed structure. Safe and reliable system.

Highlights of Laser Engraving Machine for Denim

Especially suitable for Denim Jeans laser wash processing Projection positioning engraving parts, processing more accurate Multi-station circulating conveyor, precisely aligning and feeding Working area: 900X900mm / 1200X1200mm 500W / 275W CO2 RF metal laser generator 3D dynamic large-format galvanometer marking technology Energy-saving Low maintenance Hermetic structure Low contamination Excellent suction effect High working efficiency

ZJ(3D)-9090LD Denim Jeans Laser Engraving Machine Technical Parameter
Laser Generator and Optic Parameters
Laser Type	CO2 RF metal laser	Laser Power	500W / 275W
Laser Wavelength	10.6 micro meters	Galvo effective area	900mmX900mm
Galvo Processing Speed	0-20000mm/s (defined as the process material and requirement)
Positioning Accuracy	±0.1mm
Power Supply	AC380V ± 5%  50Hz
Software system
Control software	Golden Laser original software
Software Format	BMP, AI, DST, DXF, PLT, etc.
Working table parameter
Working table type	Conveyor mesh belt working table
Extend feed table area	1100mm width X 1500mm length
Conveyor speed	0-600 mm/s	Conveyor belt motor	Servo motor
Auxiliary System
Protection System	Full protection with optic part structure
Motion System	Offline mode servo motor control system, 5” LCD screen
Control System	Golden Laser III control card
Cooling System	Constant temperature water chiller
Exhaust System	Fixed Upper exhaust fans / Air blow fans

Laser Engraving Machine for Denim Processing Flow

Feeding station with the projector → 3 axis dynamic galvanometer processing station → Loading station

    © Feeding station with the projector: put the Jeans on the conveyor belt within the outline area of projector, then press the foot switch, the machine will be feeding.

    © 3 axis dynamic galvanometer processing station: After feeding stop, laser system automatically start to engrave the designed graphics patter