High Illuminated 250W Studio Flash Lighting Equipment 800WS Flash Energy
Certification:CE/ROHS/REACH/WEEE/EMF
Studio Flash Light 800WS Photography Equipment Flash Head Studio Equipment Digital Photography Lighting
Always Aluminum-Solid & Stable!
SPECIFICATIONS
| Type | E800 |
| Flash energy J (Ws) | 800 |
| GN (ISO 100) | 88 |
| Control range | 5 f-stops in 1/10 f-stop increments (1:32) |
| Recycle Time to full | 2~3S |
| Flash duration (t 0.5) | 1/1500~1/800 |
| Controls | Controls Illuminated digital display |
| Modeling Lamp Output | 250W |
| Flash Tube | Plug-in |
| Flash monitoring | Visual: Dim and boost function for modelling light Audible: Buzzer |
| Color Temperature | 5600K±200 |
| Flash Beam Width | 55° |
| Flash release | Slave Sensor / Synch Cable(Radio Trigger) / Test Button |
| Ready display | Visual and audible (can be switched off) signals when 100 % of selected energy is reached |
| Synch Voltage | 5V |
| Cooling Fan | Yes |
| Power Cable | 3 x 0,75 mm² H05VV-F 90°C |
| Amperage of Fuses | 10 A |
| Power Source | AC200-240V 50/60Hz |
| Weight kg | 3.2 |
| Dimension (L x W x H) | 54 x 21 x 27 |
| Quantity per carton | 3 sets |
PRODUCT CONTAINS
FEATURES
HOW TO REPLACE THE PLUG-IN FLASH TUBE
If the unit does not flash but the ON/OFF switch indicates that there is power, it could be that the flash tube needs replacing.
Turn off the main switch; Remove the power cable; Take the unit from its stand and put it on a rigid surface;Please wait for several minutes until the modeling lamp and flash tube cool down; Remove the flash tube and store the modeling lamp carefully; Replacing the flash tube as the procedure as follows ; Pull the flash tube out of the unit; Hold the replacement flash tube assembly, taking care to support both legs of the tube and locating the three brass sockets onto the plugs in the front of the unit gently but firmly; Push the flash tube into position. A clear glove should be used. Don’t touch the flash tube with your fingers because it will cause dark markings when it is used. Please check if the tube correctly aligned; Wind the trigger wire around the flash tube support. Re-connect and test the unit as usual.
CONTACTING INFORMATION
E-mail: info@simockphoto.com.cn
amandalee@simockphoto.com.cn
Skype: amanda_cn
Contacting: Ms. Amanda Lee (Export Manager)
Send Inquiry to This Supplier
You May Also Like
-
UV Lamp/Ultraviolet Lamp/UV Light/mercury LampNegotiableMOQ: 1 Piece
-
LED DLP Laser Osram Projector Lamp Supporting Real 3d,1080PUS$ 737 - 1,500MOQ: 1 Piece
-
Projector Lamp ELPLP42 With Lamp Holder for EPSON EMP-280US$ 138 - 150MOQ: 1 Set
-
Mercury LampsNegotiableMOQ: 50 Pieces
-
Color Metal Halide LampNegotiableMOQ: 1000 Pieces
-
3W LED Cabinet LampUS$ 7.6 - 8MOQ: 5 Pieces
-
Fluorescent Circle Bulb 22w/32w/40w Factory OfferedNegotiableMOQ: 3000 Pieces
-
100% ORIGINAL ELPLP49/ V13H010L49 for Epson PowerLite HC 8700UB/PowerLite HC 8500UB WITH HOUSING Projector LampUS$ 85 - 99MOQ: 1 Piece
-
Mercury Blended LampNegotiableMOQ: 2000 Pieces
-
E40 500w Self Ballas High Pressure Mercury LampUS$ 0.68 - 0.68MOQ: 500 Pieces