Digimaster 2 Speedometer

Speedometer

Properties:

1.Local operation: Touch screen with keys

2.Remote operations: PC. Internet operating

3.LCD: 320*240 TFT Color screen 

4.Interface: USB and Serial Adapter 

5.Power Supply: 12V DC

6.CF card 256MB 

7. Available in four languages: English, German, Chinese and Japanese 

Introduction:

The item is mainly used for odometer adjusting, audio decoding, airbag resetting,

anti-theft code reading, and ECU memory programming. Update through Internet;

nearly support all kinds of latest vehicles to 2005. 

Product Feature

Worldwide advanced technology 

BMW 7 SER E65/E66 (from 2001 to 4th of 2005) 56 different kinds of CAS adjusting via OBD-II 

BMW 5/7ser/X5 since 2000 cluster adjusting directly, no need to replace M35080 (memory) 

BMW E60 (5sersince 2004) CAS (ignition) module adjusting 

BMW E65/E66 (7sersince 2002) CAS module adjusting 

BMW MINI Cooper, Rover Freelander adjusting 

Mercedes Benz W203/W220/W211 cluster and (EZS) ignition module adjusting 

Mercedes Benz S/C/E class (2004-2005) cluster and (EZS) ignition module adjusting 

Hyundai/Peugeot/Renault/Honda/Picasso (NEC CPU) cluster adjusting 

Product Specification/Models

Configurations for Digimaster-II standard package:

Diagnostic Adapter, NEC Adapter, W203/W220 Adapter

OBP Adapter, ICP Adapter, Grand Cherokee Adapter

Configurations for Digimaster-II full package:

Diagnostic Adapter, NEC Adapter, W203/W220 Adapter

OBP Adapter, ICP Adapter, Grand Cherokee Adapter

9S12 Adapter, E65/E66 CAS OBD2 Adapter, C/E CLASS Diagnostic Adapter

E65/E66/W211 Adapter Application Operation

The item is a high-quality tool with simple operation, which EDP layman 

without previous experience can operate easily and safely (no extra PC 

or laptop needed) 

The vehicle menu of DIGIMASTER-II indicates the respective chip or CPU 

type for each car model so that what you do is to select vehicle and do 

the relative operations according to wiring diagram, welding diagram or 

diagnosis possibilities shown in our picture. In all, the following are  

the odometer software in Digimaster-II programmer 

I. Diagnostic socket: by connecting with the diagnostic socket without removing the cluster

Example: odometer programming of an AUDI A6

1 Turn ignition on 

2. Connect the Digimaster-II to the OBD II plug and the diagnostic port 

3.Select the menu AUDIDIAGNOSISAUTODETECT A6 (after 96)

4.The Digimaster-II shows you the current KM value 

5.Input new KM

6.Check the new value with ok 

II. Cluster socket: by connecting the cluster socket without opening the cluster

Example: odometer programming of a Mercedes C class W203

1. Remove the cluster 

2. Select the menu MercedesC class W203MODE 2 ODO socket 

3. Connect the C/E Class DiagProgAdapter with Digimaster-II. (Note: 

please connect the C/E cable with the cluster socket firstly) 

4. Select the menu NEXT

5. Input new KM

6. Check the new value with ok 

III. MEMORY On Board Programming: by welding chip onto OBP adapter

Example: odometer programming of a Honda HRV C46

1. Remove the cluster and open it 

2. Select the menu HondaHRV C46

3. Look for the location of the chip 93C46

4. Remove the chip and put it onto OBP adapter

5. Select the menu NEXT

6. File the data

7. The Digimaster-II shows you the current KM value

8. Input new KM

9. Check the new value with ok 

IV. MEMORY In Circuit Programming: by soldering contacts on the circuit

Support Cars:

Alfa, Audi, Benz, Bmw, Cadillac, Chrysler, Citroen, Ferrari, Fiat, Ford, GM, Honda, Hyundai, Isuzu, Jaguar, Kia, Lexus, Lincoln, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Porton, Renault, Rover, Saab, Skoda, Ssangyong, Subaru, Suzuki, Yoyota, Volvo, VW, Wiesmann.

Motorcycles:

Bmw 24C02, Cagiva CS56, Honda c46, Honda c56, Suzuki c46, Suzuki c56, Buell CS46, Harley 95010, Harley CS46